ELECTROMAGNETIC PARTICLE BRAKE EMAG 90 Specifications Nominal torque Minimal torque Coil resistance - 20°C Rated current DC Rotor inertia Weight Heat dissipation Continuously sustained ft.lb ft.lb Ohms A lb.ft 2 lb • Highest Torque Density • Maintenance-Free Bearing • High Level of Torque Stability • Easy Installation * Heat dissipation is the mechanical power (P = cw) maximum allowable. • Easy Electric Remote Control Application Notes •Lubricated for life (other internal lubrication not required). The shaft should be lubricated upon assembly, to prevent seizing. •For use with Cleveland-Kidder® 2 Amp, 24 VDC power suppy (Model EMAG-PS2) •The standard device is designed for horizontal shaft orientation, and a minimal speed of 60 RPM. Maximum speed is 3000 RPM (without exceeding the max. heat dissipation capability). •For Engineering application, please contact our technical support. •In normal use, the outside temperature of the device can increase up to 100°C, without damage.

Cleveland-Kidder® Specifications Nominal torque 120 Minimal torque 1.2 Coil resistance - 20°C Rated current DC Rotor inertia 26.5.10-3 Weight 25 Heat dissipation Continuously sustained with heat sink – H Continuously sustained with heat sink and blower – HB ft.lb ft.lb Ohms A lb.ft 2 lb W* 550 • Highest Torque Density • Easy Installation • Maintenance-Free Bearing • Easy Electric Remote Control • High Level of Torque Stability * Heat dissipation is the mechanical power (P = cw) maximum allowable. ELECTROMAGNETIC PARTICLE BRAKE Application Notes INDUSTRIAL PRODUCTS 7550 Hub Parkway Cleveland,...