EMAG 9 Clutch
2Pages

Catalog excerpts

Specifications Nominal torque Minimal torque Coil resistance - 20°C Rated current DC Rotor inertia Weight Heat dissipation continuous sustained depending on external part rotation speed ft.lbf ft.lbf W A lb.ft 2 lb * Heat dissipation is the mechanical power (P = cw) maximum allowable. Application Notes • Mounting must be made without any stress. Lubricated for life (other internal lubrication not allowed). The shaft should be lubricated upon assembly, to prevent seizing. • Low DC current power supply for coil. • The standard device is designed for horizontal shaft orientation, and a minimal speed of 60 RPM. Maximum speed is 3000 RPM (without exceeding the max. heat dissipation capability). • For Engineering application, please contact our technical support. • In normal use, the outside temperature of the device can increase up to 100°C, without damage.

Open the catalog to page 1

Safety • If the device is to be used in dusty, humid or corrosive environment, special protection needs to be considered. Recommended mounting principles In line mounting Parallel mounting Rotating shaft Flexible coupling Fixing flange Rotating shaft Fixing flange ©Cleveland Motion Conrols, Inc. 7550 Hub Parkway • Cleveland, Ohio 44125 ph: 216.524.8800 or 800.321.8072 • fax: 216.642.2199 www.cmccontrols.com • email: literature@cmccontrols.com

Open the catalog to page 2

EMAG 9 Clutch 2Pages

Catalog excerpts

All Cleveland Motion Controls catalogs and technical brochures

EMAG 9 Clutch
2Pages