EMAG 9 Brake
2Pages

Catalog excerpts

ELECTROMAGNETIC PARTICLE BRAKE • Easy Electric Remote Control 12 0.14 ft.lb ft.lb Ohms A lb.ft 2 lb Nominal torque Minimal torque Coil resistance - 20°C Rated current DC Rotor inertia Weight Heat dissipation Continuously sustained • Easy Installation * Heat dissipation is the mechanical power (P = cw) maximum allowable. • High Level of Torque Stability • Highest Torque Density • No Dust • Noiseless • Maintenance-Free Bearing •Lubricated for life (other internal lubrication not required). The shaft should be lubricated upon assembly, to prevent seizing. •For use with Cleveland-Kidder® 2 Amp, 24 VDC power suppy (Model EMAG-PS2) •The standard device is designed for horizontal shaft orientation, and a minimal speed of 60 RPM. Maximum speed is 3000 RPM (without exceeding the max. heat dissipation capability). •For Engineering application, please contact our technical support. •In normal use, the outside temperature of the device can increase up to 100°C, without damage. Application Notes

Open the catalog to page 1

Cleveland-Kidder® Specifications Nominal torque 12 Minimal torque 0.14 Coil resistance - 20°C Rated current DC Rotor inertia 0.25.10-3 Weight 4.4 Heat dissipation Continuously sustained with heat sink – H Continuously sustained with heat sink and blower – HB ft.lb ft.lb Ohms A lb.ft 2 lb W* 130 ELECTROMAGNETIC PARTICLE BRAKE EMAG 9H EMAG 9HB • Easy Electric Remote Control • Low Power Consumption • High Level of Torque Stability • Highest Torque Density *Heat dissipation is the mechanical power (P = cw) maximum allowable. • Easy Installation • Maintenance-Free Bearing Max. deepness 12...

Open the catalog to page 2

EMAG 9 Brake 2Pages

Catalog excerpts

All Cleveland Motion Controls catalogs and technical brochures

EMAG 9 Brake
2Pages