ELECTROMAGNETIC PARTICLE BRAKE • Easy Electric Remote Control Nominal torque Minimal torque Coil resistance - 20°C Rated current DC Rotor inertia Weight Heat dissipation Continuously sustained ft.lb ft.lb Ohms A lb.ft 2 lb • Low Power Consumption • High Level of Torque Stability • Highest Torque Density • No Dust • Noiseless • Easy Installation • Maintenance-Free Bearing * Heat dissipation is the mechanical power (P = cw) maximum allowable. Application Notes •Lubricated for life (other internal lubrication not required). The shaft should be lubricated upon assembly, to prevent seizing. •For use with Cleveland-Kidder® 2 Amp, 24 VDC power suppy (Model EMAG-PS2) •The standard device is designed for horizontal shaft orientation, and a minimal speed of 60 RPM. Maximum speed is 3000 RPM (without exceeding the max. heat dissipation capability). •For Engineering application, please contact our technical support. •In normal use, the outside temperature of the device can increase up to 100°C, without damage.

Cleveland-Kidder® Specifications Nominal torque 65 Minimal torque 0.63 Coil resistance - 20°C Rated current DC Rotor inertia 2.10-3 Weight 11 Heat dissipation Continuously sustained with heat sink – H Continuously sustained with heat sink and blower – HB ft.lb ft.lb Ohms A lb.ft 2 lb W* 250 • Easy Electric Remote Control • Low Power Consumption • High Level of Torque Stability • No Dust • Noiseless • Easy Installation • Maintenance-Free Bearing • Highest Torque Density * Heat dissipation is the mechanical power (P = cw) maximum allowable. ELECTROMAGNETIC PARTICLE BRAKE Application Notes •Lubricated...