Catalogs >
Cleveland Motion Controls >
EMAG 4H Clutch

EMAG 4H Clutch
2Pages

Catalog excerpts

Specifications Nominal torque Minimal torque Coil resistance - 20°C Rated current DC Rotor inertia Weight Heat dissipation continuous sustained depending on external part rotation speed ft.lbf ft.lbf W A lb.ft 2 lb *Heat dissipation is the mechanichal power (P = cw) maximum allowable. Application Notes • Mounting must be made without any stress. Lubricated for life (other internal lubrication not allowed). The shaft should be lubricated upon assembly, to prevent seizing. • Low DC current power supply for coil. • The standard device is designed for horizontal shaft orientation, and a minimal speed of 60 RPM. Maximum speed is 3000 RPM. (without exceeding the max. heat dissipation capability). • For application Engineering, please contact our technical support. • In normal use, the outside temperature of the device can increase up to 100°C, without damage.

Open the catalog to page 1

Safety • If the device is to be used in dusty, humid or corrosive environment, special protection needs to be considered. Recommended mounting principles In line mounting Elastic coupling Rotating shaft Rotating shaft ©Cleveland Motion Conrols, Inc. 7550 Hub Parkway • Cleveland, Ohio 44125 ph: 216.524.8800 or 800.321.8072 • fax: 216.642.2199 www.cmccontrols.com • email: literature@cmccontrols.com Elastic coupling

Open the catalog to page 2

EMAG 4H Clutch 2Pages

Catalog excerpts

All Cleveland Motion Controls catalogs and technical brochures

EMAG 4H Clutch
2Pages