EMAG 4 Brake
2Pages

Catalog excerpts

Brake EMAG 4 Specifications 5 0,1 ft.lbf ft.lbf Ohm A lb.ft 2 lb Nominal torque Minimal torque Coil resistance - 20°C Rated current DC Rotor inertia Weight Heat dissipation continuous sustained * Heat dissipation is the mechanical power (P = cw) maximum allowable. • The standard device is designed for horizontal shaft orientation, and a minimal speed of 60 RPM. Maximum speed is 3000 RPM. (without exceeding the max. heat dissipation capability) • For Engineering application, please contact our technical support. • In normal use, the outside temperature of the device can increase up to 100°C, without damage. • Mounting must be made without any stress. Lubricated for life (other internal lubrication not allowed). The shaft should be lubricated upon assembly, to prevent seizing. • Low DC current power supply for coil.

Open the catalog to page 1

ft.lbf ft.lbf Ohm A lb.ft 2 lb Nominal torque Minimal torque Coil resistance - 20°C Rated current DC Rotor inertia Weight Heat dissipation continuous sustained * Heat dissipation is the mechanical power (P = cw) maximum allowable. • Mounting must be made without any stress. Lubricated for life (other internal lubrication not allowed). The shaft should be lubricated upon assembly, to prevent seizing. • Low DC current power supply for coil. • In normal use, the outside temperature of the device can increase up to 100°C, without damage. Cleveland Motion Controls, Inc. 7550 Hub Parkway...

Open the catalog to page 2

EMAG 4 Brake 2Pages

Catalog excerpts

All Cleveland Motion Controls catalogs and technical brochures

EMAG 4 Brake
2Pages