ELECTROMAGNETIC PARTICLE BRAKE Specifications Nominal torque Minimal torque Coil resistance - 20°C Rated current DC Rotor inertia Weight Heat dissipation Continuously sustained ft.lb 260 ft.lb 2.6 Ohms 10 A 1.5 lb.ft 2 206.10-2 lb 84 W* • Easy Electric Remote Control • Low Power Consumption • High Level of Torque Stability • Highest Torque Density • No Dust * Heat dissipation is the mechanical power (P = cw) maximum allowable. • Easy Installation • Maintenance-Free Bearing 94 74 10 Supply by 2 wires Length = 250 mm 6 x screws CHC M8x80 at 60 ° on f 294 (user’s fixation) Application Notes •Lubricated for life (other internal lubrication not required). The shaft should be lubricated upon assembly, to prevent seizing. •For use with Cleveland-Kidder® 2 Amp, 24 VDC power suppy (Model EMAG-PS2) •The standard device is designed for horizontal shaft orientation, and a minimal speed of 60 RPM. Maximum speed is 3000 RPM (without exceeding the max. heat dissipation capability). •For Engineering application, please contact our technical support. •In normal use, the outside temperature of the device can increase up to 100°C, without damage.

ELECTROMAGNETIC PARTICLE BRAKE Specifications Nominal torque 350 Minimal torque 3.5 Coil resistance - 20°C Rated current DC Rotor inertia 89.10-3 Weight 53 Heat dissipation Continuously sustained with heat sink – H Continuously sustained with heat sink and blower – HB ft.lb ft.lb Ohms A lb.ft 2 lb W* 900 * Heat dissipation is the mechanical power (P = cw) maximum allowable. Easy Electric Remote Control Low Power Consumption High Level of Torque Stability Highest Torque Density No Dust Noiseless Easy Installation Maintenance-Free Bearing 94 Supply by 2 wires Length = 250 mm 6 x screws CHC M8x80...