ELECTROMAGNETIC PARTICLE BRAKE EMAG 26 Specifications Nominal torque Minimal torque Coil resistance - 20°C Rated current DC Rotor inertia Weight Heat dissipation Continuously sustained ft.lb ft.lb Ohms A lb.ft 2 lb • High Level of Torque Stability • Highest Torque Density • No Dust • Easy Installation • Maintenance-Free Bearing * Heat dissipation is the mechanical power (P = cw) maximum allowable. • Easy Electric Remote Control •Lubricated for life (other internal lubrication not required). The shaft should be lubricated upon assembly, to prevent seizing. •For use with Cleveland-Kidder® 2 Amp, 24 VDC power suppy (Model EMAG-PS2) •The standard device is designed for horizontal shaft orientation, and a minimal speed of 60 RPM. Maximum speed is 3000 RPM (without exceeding the max. heat dissipation capability). •For Engineering application, please contact our technical support. •In normal use, the outside temperature of the device can increase up to 100°C, without damage. Application Notes

ELECTROMAGNETIC PARTICLE BRAKE Specifications Nominal torque 35 Minimal torque 0.33 Coil resistance - 20°C Rated current DC Rotor inertia 0.79.10-3 Weight 6.7 Heat dissipation Continuously sustained with heat sink – H Continuously sustained with heat sink and blower – HB ft.lb ft.lb Ohms A lb.ft 2 lb W* 200 • High Level of Torque Stability • No Dust • Easy Installation • Maintenance-Free Bearing • Easy Electric Remote Control • Highest Torque Density * Heat dissipation is the mechanical power (P = cw) maximum allowable. Application Notes •Lubricated for life (other internal lubrication not required)....