EMAG 150
2Pages

Catalog excerpts

ELECTROMAGNETIC PARTICLE BRAKE Specifications Nominal torque Minimal torque Coil resistance - 20°C Rated current DC Rotor inertia Weight Heat dissipation Continuously sustained ft.lb 150 ft.lb 1.5 Ohms 12 A 1.55 lb.ft 2 818.10-3 lb 52.9 W* * Heat dissipation is the mechanical power (P = cw) maximum allowable. • Easy Electric Remote Control • Low Power Consumption • High Level of Torque Stability • Highest Torque Density • No Dust • Noiseless • Easy Installation • Maintenance-Free Bearing Application Notes •Lubricated for life (other internal lubrication not required). The shaft should be lubricated upon assembly, to prevent seizing. •For use with Cleveland-Kidder® 2 Amp, 24 VDC power suppy (Model EMAG-PS2) •The standard device is designed for horizontal shaft orientation, and a minimal speed of 60 RPM. Maximum speed is 3000 RPM (without exceeding the max. heat dissipation capability). •For Engineering application, please contact our technical support. •In normal use, the outside temperature of the device can increase up to 100°C, without damage.

Open the catalog to page 1

Cleveland-Kidder® Specifications Nominal torque 200 Minimal torque 2 Coil resistance - 20°C Rated current DC Rotor inertia 35.2.10-3 Weight 30 Heat dissipation Continuously sustained with heat sink – H Continuously sustained with heat sink and blower – HB ft.lb ft.lb Ohms A lb.ft 2 lb W* 750 • Low Power Consumption • High Level of Torque Stability • No Dust • Easy Installation • Maintenance-Free Bearing • Easy Electric Remote Control • Highest Torque Density * Heat dissipation is the mechanical power (P = cw) maximum allowable. ELECTROMAGNETIC PARTICLE BRAKE Application Notes •Lubricated...

Open the catalog to page 2

EMAG 150 2Pages

Catalog excerpts

All Cleveland Motion Controls catalogs and technical brochures

EMAG 150
2Pages