Brake EMAG 1 Specifications 2 0,04 ft.lbf ft.lbf Ohm A lb.ft 2 lb Nominal torque Minimal torque Coil resistance - 20°C Rated current DC Rotor inertia Weight Heat dissipation continuous sustained *Heat dissipation is the mechanichal power (P = cw) maximum allowable. • Mounting must be made without any stress. Lubricated for life (other internal lubrication not allowed). The shaft should be lubricated upon assembly, to prevent seizing. • Low DC current power supply for coil. (See EMAG PB2 Electronic data sheets). • The standard device is designed for horizontal shaft orientation,and a minimal speed of 60 RPM. Maximum speed is 3000 RPM. (without exceeding the max. heat dissipation capability). • For Engineering application, please contact our technical support. • In normal use, the outside temperature of the device can increase up to 100°C, without damage.

Brake EMAG 1H Specifications ft.lbf ft.lbf Ohm A -6 2 16.10 kg.m lb.ft 2 0,90 kg lb Nominal torque Minimal torque Coil resistance - 20°C Rated current DC Rotor inertia Weight Heat dissipation continuous sustained *Heat dissipation is the mechanichal power (P = cw) maximum allowable. Cleveland Motion Controls, Inc. 7550 Hub Parkway Cleveland, Ohio 44125 phone: 216.524.8800 or 800.321.8072 fax: 216.642.2199 www.cmccontrols.com • Mounting must be made without any stress. Lubricated for life (other internal lubrication not allowed). The shaft should be lubricated upon assembly, to prevent seizing....