TENSION INDICATOR CLASSIC LINE Indicates the precise tension value. For use with Cleveland -Kidder Classic model tension transducers. • Easy to read analog or LED digital displays • State of the art technology incorporates Cleveland-Kidder's latest Classic DIN rail amplifier for signal conditioning Performance Benefits Versatility and precision describe the Cleveland-Kidder Classic Tension Indicator. Models are offered for all styles of Classic tension transducers. remote device such as a drive or PLC. An accessory 0-10VDC or 4-20-ma output is offered as either non-isolated or isolated for interfacing to the remote device. A multitude of displays are available. Either easy to read analog or LED digital displays are offered. A 0-100% analog display is standard but the scale can be customized for any range of values. A large 0.56 inch digit LED display is standard but an extra large 1.5 inch high LED display is also available. All components are mounted on the inside of the hinged enclosure door. This makes them easily accessible for initial set-up and service. The Cleveland-Kidder Tension Indicator directly accepts 50/60HZ, 86-264 VAC single phase input power. No switches or jumpers are required for operation at 120 or 240VAC. 24VDC can also be brought directly into the amplifier. The Indicator is state of the art, high precision technology. It incorporates Cleveland -Kidder's latest Classic DIN rail amplifier for signal conditioning. This amplifier incorporates the latest surface mount component technology. Many applications require that tension be displayed locally and also input to a • Components easily accessible for set-up and service • Customized analog scales available • Extra large character (1.5 inch high) digital display available • Dual displays available for simultaneously displaying both left and right tension • Directly accepts 50/60HZ, 86264 VAC, single phase input power • Accepts 24VDC input power • Accessory 0-10 VDC or 420ma tension output provided for remote devices • All CE components

HOW TO ORDER Step 1: Confirm that you have CMC Classic transducers. Classic uses a half bridge design. For more information refer to the data sheet or manual for the Classic amplifier which can be found on the Cleveland-Kidder Web site (www.clevelandkidder.com). Contact CMC if you are not sure which design you have. Step 2: Determine the type of display you require. Many customers prefer the analog display because the needle position provides a visual point of reference. Some customers prefer a digital display since it provides a finer resolution in some cases. However, damping (a standard indicator...

TENSION INDICATOR Fuses Classic Din Rail Amplifier SPECIFICATIONS - CLASSIC SERIES INDICATORS INDUSTRIAL PRODUCTS DIVISION Cleveland, Ohio 44125 . . .. ... IIF to ' ^Cleveland Tel: (216) 524-8800 or (800) 321 -8072 www.clevelandkidder.com //I ^I / ^ ~Motion Controls

TENSION INDICATOR * max dimension shown, merer faceplate Thickness varies with mode! Type INDUSTRIAL PRODUCTS DIVISION 7550 Hub Parkway ItF thiamin Kanrl Cleveland, Ohio 44125 ' ^Irieveiana IftTTtJ Cleveland www.clevelandk.dder.com //j *j y _ ?Motion Controls Copyright 2005. Cleveland Motion Controls. All Rights Reserved.