Our all-in-one WETBLAST FLEXTM system gives you convenience you don’t get from traditional slurry systems. Its design, simplified set up, and ease of operation make for a more productive blasting experience. Because we mix the abrasive and water after it leaves the blast machine, you never have to empty a machine of messy water/abrasive mix. Flexible set up options allow you to position the water injector either at the base of the blast machine or at the nozzle – your choice. With the injector at the nozzle, you can adjust the water/ abrasive mix at any time. Switch to dry-blasting with the FLEX in just a few minutes, simply remove the water injector body, and turn off air to the pump. Committed to extraordinary products, technical support and service ISO 9001 Certifie

SKID MOUNTED All-in-one convenient design with fork lift pockets and lifting eyes. WATER SOURCE On board water tank or municipal water source – add rust inhibitor if needed. With injector and ACS at the nozzle, you can control wash down and surface blow off without a trip to the blast machine. With the injector adaptor and ACS mounted at the nozzle, there’s no need for a pot tender. FLEX - *BASE UNIT FLEX - PACKAGE 6ft3 Blast Machine with Pneumatic Remotes and 50 ft Control Line 2 Moisture Separator 3 High-flow Regulator 4 Base-Mount Wetblast InjectorTM 5 Abrasive Cut-Off Switch 6 120 Gallon...