Save Time and Labor Reduce Abrasive Costs Reduce Disposal Costs with economical, low-maintenance sweep-in recovery systems Cost Saving recovery system allows you to select from a wide range of recyclable blast media - glass bead, aluminum oxide, plastic, steel shot & grit, cut wire, and Expendable abrasives are inexpensive and widely available, but they break down rapidly often after just one use. The used abrasive dust must be packed for disposal, possibly as hazardous waste if it contains paint dust. Recyclable abrasives cost more to buy, but can cut your annual media costs. For example, steel...

Standard and Custom Sweep-In Models M-SECTION® Systems for glass bead, plastic media and aluminum oxide Our standard sweep-in M-Section® pneumatic recovery systems efficiently recover and recycle most medium and low-density blast media, such as glass bead, plastic, and aluminum oxide. The recovery section can be placed in a shallow channel, just 10 inches deep, for a true sweep-in operation, or surface mounted where conditions will not allow excavation. HOPPER Systems for steel grit and shot elevator recovery systems process up to 180 cubic feet per hour of dense and coarse media, such as steel...

Floor System Floor Size Media Recovery Media Cleaning Media Storage Dust Collection for media cleaning system Blast Machine Electrical Specifications Operator Safety Equipment Start-Up Supervision recovery channel uniform load Vacuum duct to media reclaimer. (2 hp motor mounted on reclaimer with Adjustable cyclonic separator with wear plate 12 cu.ft. total (6 cu.ft. hopper atop 6 cu.ft. blast machine) cleaning RP-cartridge collector (2hp motor mounted aggressive media hopper to extend blasting time between recovery • Shed plates to enhance recovery channel recessed hopper uniform load Bucket...