Pulsar® VI-PE Clean Peen Deburr Finish Prep Surfaces Model Pulsar® VI-PE Ergonomic high-production pressure-blast cabinet The ZERO Pulsar ® VI-PE is a high-production, ergonomic blast cabinet designed specifically to enhance productivity and efficiency by offering a safe and comfortable work station for production blast operators. The Pulsar® VI-PE makes long production runs much easier by allowing workers to concentrate on achieving the desired surface treatment rather than on their physical discomfort due to long periods of standing. Pulsar® VI-PE Pressure Cabinet Features: Safety • Door interlock system interrupts blasting when either door is opene • Optional time-delay door locking system keeps doors locked after blasting stops • Double-wall, insulated doors, reduce exterior noise • Industrial-quality lift-off hinges allow easy door removal • Full-opening doors maximize work chamber capacity and ease loading large parts • Full-length, neoprene-on-fabric gloves protect operator • Ceiling light fixture maximizes window view area and offers commanding view of interior Productivity • Unique air logic system maximizes air and media flow for blasting • ASME-code pressure vessel, 1.0 cu ft capacity, with 1/2” piping • Industrial-quality, coupled two-braid blast hose and tungsten carbide nozzle • Reverse-pulse cartridge dust collector evacuates spent media and ensures optimal visibility for blasting; traps 99.7% of dust down to 0.5 micron • Adjustable chrome latches seal doors tight through years of service Convenience • Tilt-out window allows tool-free glass changes in minutes • Easy-to-reach pressure regulator, gauge, and electric switch • Built-in air gun allows work piece blow-off inside cabinet Tungsten Carbide Blast Nozzle The system comes with a 3/16” orifice a Tungsten Carbide pressure blast nozzle, which consumes 38 cfm of compressed air when blasting at 80 psi. The nozzle's long-wearing properties ensure hundreds of hours of service with glass bead media. Popular Accessories • Air-powered Vertical Lift Doors • Alox Kit for Use with Harsh Media • Dust Collector Auto-pulse Kit • HEPA Filter • Pass-through Doors • Rubber Wall Curtains • Steel Media Kit • Time-delay Door Locks • Turntable & Track Assembly Common Applications • Cleaning parts • Deburring machined parts • Stripping paint • Improving surface finish • Removing carbon build up

Working Chamber Size Door Opening Pulsar® VI-PE: Nominal 600 cfm Reverse-pulse cartridge dust collector (which traps 99.7% of dust down to 0.5 micron) allows non-stop, high-production blasting. The polyester-cellulose cartridge is pulse cleaned each time the pedal is pressed and released for maximum filter efficiency. A dust collector auto-pulse kit is available as an option. Worn cartridge can be replaced in minutes. Filtering Area Pulsar® VI-PE 195 ft2(18,1m2) Dust concentration in exhausted air is nominally 5.0 mg/m3. For especially dust sensitive work environments, order the optional HEPA...