PULSAR IX Suction Blast Cabinet Model Pulsar IX suction with Power Module Rear view of Suction Power Module 1/ Worksurface flush with door sill for easier access. 1/ Full-length, neoprene-on-fabric gloves resist wear and protect operator. 1/ Ceiling-mounted, fluorescent light fixture with abra- sive resistant Lexan® cover for extraordinary 1/ Safety interlocks interrupt blasting if either door is opened. (Conforms to US regulations.) 1/ Adjustable, heavy-duty chromed latches seal doors tight through years of service. 1/ Unique Air Logic system (pilot actuated) to maxi- mize air flow to the blast gun. 1/ Double-wall, sound-insulated doors, with industrial- quality lift-off hinges. 1/ 14-gauge steel all-welded construction forms a rigid, long-lasting, cabinet shell. 1/ Large window provides 2-1/2 times the viewing area compared to our smaller cabinets. 1/ Tilt-out window, for tool-free glass changes in 1/ Pressure regulator, gauge, and electric switch mounted within easy reach. 1/ Built-in blow-off gun helps keep dust inside the cabinet, not on your floor. Power Module Features: 1/ Standard reclaim wear plate. 1/ Adjustable vortex tube. ✓ HEPA filter ready. ^ Designed to handle steel grit (G80 and finer) and steel shot (S-170 and finer) with no modifications. 1/ Components skid mounted for ease of moving. ^ Dual cartridges swing out for ease of replacement. Ceramic Nozzle The ergonomie grip reduces operator fatigue thereby tungsten or boron carbide • Remove rust, mill scale. heat scale, and carbon buildup from metals • Strip paint, powder coating, plating, and anodizing from • Eliminate defects from molded parts • Beautify metal surfaces • Etch a wide variety of materials • Clean release agents and material buildup from molds • Extract residual sand from Cutaway shown
Open the catalog to page 1PULSAR SUCTION SYSTEM Actual Space required depends on equipment configurations, options and desired work flow. Allow additional work space for operator and main-ten- ance access. Working Chamber Size Door Opening Door interlock system conforms to U.S. government regulations. Window Size (safetyglass) DUST COLLECTOR Reverse pulse cartridge dust collectors (which trap 99.7% of dust down to 0.5 micron) allow non-stop, high-production blasting. The polyester-cellulose cartridges are automatically pulse cleaned for maximum filter efficiency. Worn cartridges can be replaced in minutes. Reverse Pulse...
Open the catalog to page 22 Pages
2 Pages
2 Pages
2 Pages
4 Pages
4 Pages
2 Pages
4 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
8 Pages
2 Pages
11 Pages
12 Pages
7 Pages
29 Pages
1 Page
2 Pages
8 Pages
2 Pages
2 Pages
6 Pages
2 Pages
8 Pages
2 Pages
4 Pages
4 Pages
8 Pages
8 Pages
4 Pages
1 Page
8 Pages
12 Pages
2 Pages
2 Pages
4 Pages
6 Pages