PULSAR® IX Pressure Blast Cabinet Clean Peen Deburr Finish Model Pulsar® IX-P with Power Module Pulsar® IX Features: Safety 4 Work surface flush with door sill for easier access 4 Full-length, neoprene-on-fabric gloves resist wear and protect operator 4 Ceiling-mounted, fluorescent light fixture with abrasive resistant Lexan® cover for extraordinary visibility 4 Safety interlocks interrupt blasting if either door is opened (Conforms to US regulations) 4 Adjustable, heavy-duty chromed latches seal doors tight through years of service Productivity 4 High efficiency, 2.0 cu ft capacity, ASME-coded vessel, fitted with 1" piping, industrial blast hose, couplings and integrated controls 4 Timed dust collector auto-pulse feature allows pulse adjustments suited to the application 4 Unique Air Logic system (pilot actuated) to maximize air flow to the blast gun 4 Double-wall, sound-insulated doors, with industrial-quality lift-off hinges 4 14-gauge steel all-welded construction forms a rigid, long-lasting, cabinet shell 4 Large 20" x 30" window Convenience 4 Tilt -out window, for tool-free glass changes in minutes 4 Pressure regulator, gauge, and electric switch mounted within easy reach 4 Built-in blow-off gun helps keep dust inside the cabinet, not on your floor Power Module Features: 4 Handles steel grit (G80 and finer) and steel shot (S-170 and finer) 4 Standard reclaim wear plate 4 Dual cartridges swing out for ease of replacement 4 Full access to blast machine for servicing 4 Adjustable vortex tube 4 HEPA filter ready 4 Skid mounted components Common Applications • Remove rust, mill scale, heat scale, and carbon buildup from metals • Strip paint, powder coating, plating, and anodizing from parts for rework • Eliminate defects from castings and injection-molded parts • Beautify metal surfaces • Etch a wide variety of materials • Clean release agents and material buildup from molds • Extract residual sand from castings Tungsten Carbide Blast Nozzle The standard No. 3 tungsten carbide nozzle is perfect for most blasting, while optional boron carbide nozzles stand up to hundreds of hours of blasting with aluminum oxide or other harsh abrasives. The cabinet’s blast and recovery systems can support up to a No. 6 (3/8-inch) nozzle.

PULSAR ® PRESSURE SYSTEM Actual Space required depends on equipment configurations, options and desired work flow. Allow additional work space for operator and maintenance access. A. 57.5" deep (1460mm) B. 61" wide (1549mm) C. 87" high (2210mm) BLAST/RECLAIM SYSTEM The Heart of ZERO's Blasting System Our exclusive media reclaimers continuously extract dust and debris and return properly sized, usable media to the blast system. The standard reclaimer handles most media. FROM BLAST CABINET Working Chamber Size Door Opening Dust and Fines Exhausted to Dust Collector Wear Plate Vortex Tube Reuseable...