Group: Clemco
Catalog excerpts
CPF-20 NOTE: CPF filters do not remove CO or convert CO to CO₂, or remove other toxic gases. OVERVIEW Particulate filter for breathing air supplied from a compressed air source. Features pressure regulator, mounting bracket for floor or wall mounting. CPF-20 services one or two operators; CPF-80 services up to four operators. The CPF filter removes mists, including oil mists, water vapor, and particulates greater in size than 0.5 micron REQUIREMENTS FOR OPERATION Compressed Grade D quality breathing air as defined by the Compressed Gas Association commodity specification: G-7.1 (www cganet.com). DESCRIPTION OF OPERATION The CPF filter is placed in the breathing-air line between the breathing-air source and the respirator supply hose. The CPF is the point of attachment for the respirator hose. Air enters the filter through one of the inlet ports. Moisture is removed by expansion in the outer chamber and is drained through a petcock at the bottom of the unit. The air passes through a replaceable filter cartridge. The outlet pressure is controlled by a regulator on the cap and is measured by a gauge downstream from the cartridge. APPROVALS AND CERTIFICATIONS CPF filters comply with OSHA regulation 1910.94 (6) as a component of a total respirator system. To comply with OSHA regulation 1910.134 (d), the system must also include a NIOSHapproved supplied-air respirator and carbon monoxide (CO) monitoring and/ or removal system. Pressure Regulator and Gauge Pressure Relief Valve Breathing-Air Source Moisture Bleed-off Petcock Replaceable Filter Cartridge DESIGN ADVANTAGES • One filter serves multiple respirators CPF-20 is easily converted to CPF-80 to service additional respirators • Polypropelene filter cartridge casing eliminates corrosion hazard • Filter cartridge lasts up to 3 months. • Filters can be floor or wall mounted. IMPORTANT: For safe, efficient operation, read and follow the owner’s manual (OM 04143) and seek training for everyone who will use this equipment.
Open the catalog to page 1Related Clemco Literature Description Replacement Parts Item Description Cardboard container with protective cushioning material * Replacement parts recommended to be held on hand. Authorized Distributor: Dimensions Unit Shipping Height: Width (dia.): Depth: Weight: Red body with black base bracket ISO 9001 certified. Clemco is committed to continuous product improvement. Specifications are subject to change without notice. © 2019 Clemco Industries Corp. • One Cable Car Drive • Washington, MO 63090 • Phone (636) 239-4300 • Fax (800) 726-7559 Stock No. 21963 1295 Rev. D; 04/201
Open the catalog to page 2All CLEMCO INDUSTRIES catalogs and technical brochures
-
Apollo 600
4 Pages
-
Wetblast FLEX
2 Pages
-
Apollo 20 HP
2 Pages
-
CLASSIC SERIES
12 Pages
-
Tumble Cabinets
8 Pages
-
Automated Air Blast Systems
8 Pages
-
BNP A200 Series
4 Pages
-
Debris Screen Basket
1 Pages
-
Options Plus
4 Pages
-
Cabinet Dust Collectors
8 Pages
-
Climate Control Tube (CCT)
2 Pages
-
Apollo 60 and 600
4 Pages
-
ZERO Automation
8 Pages
-
Pulsar III, VI & VI-P
6 Pages
-
Pulsar VI-PE
2 Pages
-
Pulsar IX Pressure PS
2 Pages
-
Pulsar III-PE
2 Pages
-
Pulsar III-P
2 Pages
-
Operator Safety Equipment
8 Pages
-
Clemco Mule
1 Pages
-
COMFORT VEST
7 Pages
-
FLAT-TRAK ®
29 Pages
-
RPH
11 Pages
-
RPC-2
12 Pages
-
Blast Suit & Gloves (Rev. I)
2 Pages
-
Internal Pipe Tools (Rev. A)
8 Pages
-
Big Clem Bulk Blast Machines
2 Pages
-
CAP-4 Ambient Air Pump
2 Pages
-
Tumble Cabinets
2 Pages
-
BNP Suction Blast Guns
2 Pages
-
MB series
2 Pages
-
CDF Dust Collectors (Rev. C)
4 Pages
-
CALIPSO Ambient Air Pump
2 Pages
-
Cool Air Tube (Rev. B)
2 Pages
-
INEX Blast Cabinet (Rev. E)
2 Pages
-
2-Braid Blast Hose (Rev. G)
1 Pages
-
Clem-Cool Air Conditioner
1 Pages
-
Super Comet
4 Pages
-
Pre-assembled blast-room
4 Pages
-
Blast Suit & Gloves (Rev. E)
2 Pages
-
Bulk Abrasive Blast Machines
2 Pages
Archived catalogs
-
Automated Air Blast Systems
6 Pages