1. Catalogs
  2. CLEMCO INDUSTRIES
  3. Clem-Cool Air Conditioner

Clem-Cool Air Conditioner
1 /1Page

Clem-Cool Air Conditioner

Clem-Cool Air Conditioner
1 /1Page

Catalog excerpts

Clem-Cool Air Conditioner-1

TECHNICAL DATA SHEET Note: For safe, efficient blasting, read and follow the owner's manual and seek training for everyone who will use this The Clemco Clem-Cool Air Conditioner (CCAC) allows the blast operator to con- trol the temperature and volume of air to a Clemco high-pressure Type CE continuous flow supplied-air respirator within a preset range and to cool the air by as much as 50 quality breathing-air as defined by the Compressed Gas Association Commodity Pressure requirements vary with hose length, (hose offered in 25 ft increments) Minimum pressure to produce minimum 2. Maximum hose length: 200 ft when used with respirator placed between the respirator air supply line and the helmet breathing tube. A knurled knob on the valve lets the operator adjust the cooling rate of the air entering The Clem-Cool Air Conditioner cannot be closed completely, so the operator always has at least the minimum air vol- ume required for breathing and for main- taining positive pressure inside the helmet. The CCAC comes with a belt that durable buckle can be fastened and unfas- tened with gloved hands. A belt-mounted heat shield protects the operator from warm exhaust air (a byprod- Belt-mounted, adjustable valve — cools breathing air for use with Clemco Apollo HP respirator models. Allows oper- ator to adjust flow and temperature of incoming air. Clem-Cool also can be used as the source of cool air for Clemco Comfort Vest. with Belt • Increases productivity by keeping blast operator cool and comfortable • Durable construction • Lightweight NIOSH-approved comfort approved by NIOSH for use only with Clemco Apollo HP high-pressure Type CE supplied-air respirators (not for use with low-pressure respirators). component of a NIOSH-approved system; use of counterfeit parts voids the NIOSH To maintain NIOSH approval, use only genuine Clemco Apollo replacement parts. Shipping Dimensions Blue/Black body with black shield & belt Replacement Parts Item Description Stock No. Authorized Distributor: © 2009 Clemco Industries Corp. • One Cable Car Drive • Washington, MO 63090 • Phone (636) 239-4300 • Fax (800) 726-7559

 Open the catalog to page 1

All CLEMCO INDUSTRIES catalogs and technical brochures

  1. 31188

    41  Pages

  2. 22559

    34  Pages

  3. 21941

    33  Pages

  4. 06160

    23  Pages

  5. 04124

    13  Pages

Archived catalogs

  1. Super Comet

    4  Pages

  2. MB series

    2  Pages

  3. RPH

    11  Pages

  4. RPC-2

    12  Pages

  5. COMFORT VEST

    7  Pages

  6. FLAT-TRAK ®

    29  Pages

  7. Clemco Mule

    1  Page

  8. Pulsar III-P

    2  Pages

  9. Pulsar III-PE

    2  Pages

  10. Pulsar VI-PE

    2  Pages

  11. Options Plus

    4  Pages

  12. CLASSIC SERIES

    12  Pages

  13. Wetblast FLEX

    2  Pages

  14. Apollo 20 HP

    2  Pages

  15. Apollo 600

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.