Catalogs >
CLEMCO INDUSTRIES >
Cabinet Dust Collectors

Cabinet Dust Collectors
8Pages

Catalog excerpts

INCREASE PRODUCTIVITY • DECREASE DUST EMISSIONS MORE EFFICIENT SYSTEM • EXCEPTIONAL MEDIA CLEANING Nothing outperforms a ZERO® reverse-pulse cartridge dust collector. All of our collectors trap 99.7% of dust down to 0.5 micron, dramatically decreasing the amount of dust emitted when compared to older bag-style dust collection. This increase in efficiency also leads to an increase in productivity, superior media cleaning, and reduced maintenance. All ZERO® reverse-pulse collectors operate on a pull-through principle. The exhauster paddle wheel is never in contact with dirty air, which...

Open the catalog to page 3

Reverse-Pulse Dust Collection CDC Collectors The CDC collectors range from 300 to 900 cfm of air, and are best suited for light- to mediumduty use cabinets. The collectors feature a 5-gallon lined dust drum. Designed to allow optional bag-in bag-out cartridge change, they are a great choice when dealing with dust that contains hazardous waste or unknown CDC Cartridge Access Panel Reverse-pulse Valve Pressure Regulator operated reverse-pulse cartridge cleaning switch. A timer-based auto pulse kit is available materials. The collectors come standard with a manually Motor and Exhauster...

Open the catalog to page 4

RPH Collectors RPH collectors range from 600 to 3600 cfm of air. The collectors are designed for multi- Reverse-pulse Valve shift, high-volume operations. The included Magnehelic® differential pressure gauge Nozzle Motor and Exhauster Assembly indicates to the operator when filters need service. A control panel with built-in timer automatically pulses the collector. Filter Cartridges Debris Deflector Screen Models vary in size containing between 2 and 8 filter cartridges, and either one or two 30-gallon dust collection drums. Dust drums can be lined, minimizing contact Magnehelic®...

Open the catalog to page 5

◊ When converting a cabinet from a Dry Filter collector to a CDC collector, a reclaimer conversion kit is needed. *To mount an existing motor from a cabinet with 300 cfm or 600 cfm reclaimer (in a push-thru system) to the CDC-1 collector (pull-thru system), order an adaptor plate and gasket. For 300 cfm, order adaptor plate 28245 and 9 feet 00187 gasket; for 600 cfm, order adaptor plate 28246 and 9 feet 00187 gasket. A 900 cfm reclaimer motor requires no mounting plate. IMPORTANT When converting, and buying a CDC collector less exhauster, always make sure the cfm rating and motor HP...

Open the catalog to page 7

CLEMCOf INDUSTRIES CORP. ©2016 Clemco Industries Corp. One Cable Car Drive • Washington, MO 63090 • Phone: 636.239.4300 • Fax: 800.726.7559 info@clemcoindustries.com • www.clemcoindustries.com Rev. F | 04/16

Open the catalog to page 8