1. Catalogs
  2. CLEMCO INDUSTRIES
  3. 6 Cuft Contractor Blast Machines

6 Cuft Contractor Blast Machines
1 /2Pages

6 Cuft Contractor Blast Machines

6 Cuft Contractor Blast Machines
1 /2Pages

Catalog excerpts

6 Cuft Contractor Blast Machines-1

Field portable, high-production, singlechamber blast machine, rated at 150 psi, (for one operator). Holds 6 cubic feet of blast media. Equipped with Millenniumpneumatic remote controls and Quantummanual metering valve. > Note: For safe, efficient blasting, readand follow the owner's manual and seek training for everyone who will use this equipment. > High-performance blast cleaningsystem removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 6 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 6 nozzle ( > 3 / > 8 -inchorifice). > Clean, dry, compressed air ofsufficient volume to maintain desired pressure at the nozzle. See Air Consumption Chart in Blast Off 2 booklet.?Maximum working pressure 150 psi ?Minimum pressure 30 psi needed tooperate OSHA-required remote control valves?NIOSH-approved supplied-airrespirator?Grade D breathing-air supply asdefined by the Compressed Gas Association Commodity Specification: G-7.1 (www.cganet.com)?Abrasive blast media - consult abrasivesupplier for appropriate media for your application > ?Rated for 150-psi maximum workingpressure?1 > 1 / > 2- inch Millennium valve providesunrestricted air flow?Quantum metering valve maintainssmooth, consistent flow, adjustment knob allows precise control of media flow?1 > Blast machine pressure vessel built toAmerican Society of Mechanical Engineers (ASME) code for 150-psi working pressure. Vessel is hydro- statically tested and National Board certified.Remote control system complies withOSHA regulation 1910.244 (b). > The operator controls blasting from aremote control handle at the nozzle. Pressing the handle starts blasting, releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream. > 1 / > 4 -inch piping allows up to 50percent increase in air flow, when compared to standard 1-inch piping?29-inch width fits through standarddoorways?Four-wheel integral cart for ease ofmoving?Robust handles act as skid for loadingmachine into pickup or trailer and protect valves and piping from damage ?Central hookup point for blast hose andremote controls?Weather-resistant storage area holdsmanuals, paperwork and small parts >

 Open the catalog to page 1

All CLEMCO INDUSTRIES catalogs and technical brochures

  1. 31188

    41  Pages

  2. 22559

    34  Pages

  3. 21941

    33  Pages

  4. 06160

    23  Pages

  5. 04124

    13  Pages

Archived catalogs

  1. Super Comet

    4  Pages

  2. MB series

    2  Pages

  3. RPH

    11  Pages

  4. RPC-2

    12  Pages

  5. COMFORT VEST

    7  Pages

  6. FLAT-TRAK ®

    29  Pages

  7. Clemco Mule

    1  Page

  8. Pulsar III-P

    2  Pages

  9. Pulsar III-PE

    2  Pages

  10. Pulsar VI-PE

    2  Pages

  11. Options Plus

    4  Pages

  12. CLASSIC SERIES

    12  Pages

  13. Wetblast FLEX

    2  Pages

  14. Apollo 20 HP

    2  Pages

  15. Apollo 600

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.