TECHNICAL DATA SHEET Note: For safe, efficient blasting, read and follow the owner's manual and seek training for everyone who will use this Two-braid hose is used in industrial settings where external scuffing is expected. It can be used with all common blast media. Clemco 2-braid blast hose has a durable outer casing and is more flexible than 4-ply hose. Clemco 2-braid blast hose accepts properly sized couplings and nozzle holders. The coupled hose can attach to any blast machine rated at up to 150 psi. Two-braid hose is widely used in shipyards and railyards because it stands up to external abrasions from being dragged about the blast site. For applications where 2-braid blast hoses are used (for their more durable outer casing), a 10 to 15 foot length of Clemco Supa hose can be connected as the last section before the nozzle. This whip hose is easier for the operator to bend and • More durable outer casing than Supa • Inner tube wall of SBR rubber treated with static-dissipating compound, up to 5/16-inch thick depending upon hose • Two-layer outer casing of cloth and rubber-impregnated fiber winding • Casing is pin-pricked to prevent formation of air pockets between • More flexible than 4-ply blast hose ISO 9001:2000 certified. Clemco is committed to continuous product improvement. Specifications are subject to change without notice. Durable, reinforced 2-braid blast hose, rated at 175 psi working pressure. Related Clemco Literature Abrasive Blasting CHE-1/2 nylon nozzle holder, NHP-1 nylon nozzle holder, HEP-1 nylon nozzle holder, NHP-2 nylon nozzle holder, HEP-2 nylon nozzle holder, NHP-3 nylon nozzle holder, HEP-3 nylon nozzle holder, Blast Hose, *OD spec is held for 6 inches from each end. Color - Green Ships coiled and shrink wrapped. Authorized Distributor: © 2009 Clemco Industries Corp. • One Cable Car Drive • Washington, MO 63090 • Phone (636) 239-4300 • Fax 800 726-7559 Stock No. 21972 WWW.clemcoindustries.com Job No. 1195-1295 • Date of Issue: 06/98 Rev. G: 11/09