CleaverBrooks PROFIRE* V SERIES BURNERS 1.3 - 16.8 MMBTU/HR High-efficiency burner technology for the most stringent emissions requirements.

Innovative Technology. Forced draft dual fuel burner. Suitable for firetube, firebox, commercial watertube and cast iron boilers; the V series features a unique aerodynamic air damper design which permits accurate air-to-fuel settings for maximum combustion efficiency. The V series, available in uncontrolled, and low NOx configurations offers multi-fuel versatility to meet the toughest air quality standards. Unique Air Damper Dual blade configuration offers precise control of combustion air flow throughout the entire firing range. The unique profile of the damper blades restricts air flow at...

The V Burner Explained: The V series burner offers: natural gas, propane gas, pressure atomized #2 oil and combination gas and oil fuel options from 1.3 to 16.8 MM BTU per hour. The LNV burner, capable of <30 PPM NOx emissions offers: natural gas, propane gas, pressure atomized #2 oil and combination gas and oil fuel options from 1.3 to 14.7 MM BTU per hour. V/ LNV Burner Cam Trim 14-point adjustment range available Parallel Positioning available for optimal control throughout the firing range Dual Blade Air Damper offers precise control of combustion air flow throughout firing range Gas Manifold...

1 Motor ratings for gas only or gas/oil burners using a remote oil pump, 2 Motor ratings for oil only and gas/oil burners using a direct drive oil pump, 3 Remote oil pump is optional for frame size 1 and 2 but standard for frame sizes 3 and 4. All pump motors are 115/230/1, 4 1 1/2 HP blower motor voltage is 115/230/1, 5 Low/ High and Full Modulation minimum gas pressure, 6 Lower gas supply pressure configurations available for New York City requirements Input is based on fuel Btu content and altitude of 2,000 feet or less. If altitude > 2,000 feet and < 8,000 feet, derate capacity 4% per 1,000...

Total integration doesn’t stop with the burner. Only Cleaver-Brooks offers complete boiler systems, from fuel inlet to stack outlet, that are completely designed, engineered, manufactured, integrated, and serviced by one company. That integration starts with the burner, and Cleaver-Brooks has been perfecting this integral element of the boiler system through innovation and expert engineering for more than 80 years. Packaged Burner Systems 351 21st Street, Monroe, WI 53566 USA 608.325.3141 • [email protected] cleaverbrooks.com Boiler system icons are copyrights of Cleaver-Brooks, Inc.