- Catalogs
- Cleaver-Brooks
- ILS System - Light and Switchboard
ILS System - Light and Switchboard
ILS System - Light and Switchboard
The Integrated Light & Switchboard (ILS) system incorporates LED technology to enhance the interface between flame safeguard and combustion equipment. This system aims to reduce wiring errors and improve overall quality by providing a comprehensive control panel setup.
- Integrated Burner Control Subpanel: Connects with the LED Switch Panel to manage power, fuel selection, and burner control.
- LED Switch Panel: Offers visual indications of burner sequence and firing rate, mounted on the control panel's front.
- Interconnecting Cables: Facilitate communication between components.
- Multiple Applications: The subpanel design supports various applications, minimizing wiring complexity.
- Alarm System: Includes standard alarm silencing with three optically isolated outputs for burner, limit, and auxiliary alarms.
- Local Remote Switch: Allows burner enable/disable from building management systems.
- Manual Firing Rate Potentiometer: Enables precise manual burner control.
- LED Indicators: Provide status updates on power, heat demand, ignition, fuel type, and alarm conditions.
- Power On: White LED indicates control power presence.
- Call for Heat: White LED signals burner startup demand.
- Ignition: White LED shows ignition phase.
- Main Fuel: Dual-color LED indicates fuel valve status (green for gas, amber/yellow for oil).
- Modulation Indicator: LEDs display firing level (white for 25%, yellow for 50%, blue for 75%, green for 100%).
- Burner Switch: Switches burner between local, off, and remote demand settings.
- Fuel Select: Allows safe fuel switching in dual fuel systems.
- Modulation Mode: Selects between automatic and manual flame control.
- Manual Flame Control: Adjusts firing rate in manual mode.
- Alarm Silence: Temporarily silences audible alarms while maintaining LED alerts.
- Electrical Ratings: 120 Vac (+10%/-15%), 50/60 Hz (±10%).
- Environmental Ratings: Operating temperature from -40°F to +140°F, storage from -40°F to +150°F, 85% relative humidity.
- Weight: Burner Control Subpanel: 1 lb., 12 oz.; LED Switch Panel: 4 oz.
- Dimensions: Detailed in Figures 1 & 2.
- Enclosure: NEMA 1.
- Approvals: Underwriters Laboratories, Inc. (cULus) listed.
- Single and dual fuel modes: On/Off, Low-High-Low, 135 ohm Full Modulation, 4-20 mA Full Modulation, 4-20 mA Full Modulation (R7999 Control Links).
Catalog excerpts
ILS SYSTEM INTEGRATED LIGHT & SWITCHBOARD
Open the catalog to page 1
Integrated LED Technology Multiple Applications The Integrated Burner Control Subpanel and LED Switchboard provides a wiring interface between the flame safeguard and combustion equipment reducing the potential for wiring errors and improving quality. The LED switch panel is mounted to the front of the control panel and connects to the Integrated Burner Control Subpanel using interconnecting cables. It provides power, fuel selection and auto/manual burner control along with visual indication of the burner sequence. The system consists of the Integrated Burner Control Subpanel, the LED Switch...
Open the catalog to page 2
The LEDs provide the following information: Power On - white LED indicates presence of control power in the subpanel. Call for Heat - white LED indicates that a demand for burner startup is present. Ignition - white LED indicates the burner is in the ignition phase of operation. Main Fuel - Dual color LED that indicates that the main fuel valve(s) are powered. Dual fuel mode: Green light - gas valves are open Amber/Yellow light - oil valves are open Single fuel mode: Amber light only Burner, Limit and Auxiliary Alarm - Red LED indicates what equipment section is in an alarm condition. Modulation...
Open the catalog to page 3
Product Specifications Electrical Ratings Ambient Temperature Ranges: Environmental Ratings CAUTION: Adding external limits or controls will require removal of appropriate terminal jumpers. 250V T5A WARNING:Relays must only be replaced with approved OMRON part# MY2-AC110/120S LED Switch Panel: 4 oz. (124 grams) Burner Control Subpanel: 1 lb., 12 oz. (871 grams) Humidity: 85% relative humidity, continuous, Underwriters Laboratories, Inc. (component cULus) Figure 1. Integrated Burner Control Subpanel, dimensions in inches (mm). Models Available Single and dual fuel for the following modes of operation:...
Open the catalog to page 4All Cleaver-Brooks catalogs and technical brochures
HYDRONIC SYSTEM CONTROL4 Pages
LCS150e.12 Pages
LCS250e.12 Pages
LevelMaster4 Pages
Light and Switchboard4 Pages
Model 44 Pages
Model 54 Pages
Oil Pump Set12 Pages
PCS140e.12 Pages
ProFire Retrofit8 Pages
ProFire-D8 Pages
ProFire-E Series5 Pages
ProFire-K Series2 Pages
ProFire-NTH4 Pages
ProFire-S14 Pages
ProFire-V Series5 Pages
ProFire-XL Series6 Pages
Stack Damper2 Pages
Hydronic Solutions8 Pages
LC ClearFire8 Pages
Industrial Watertube Boilers12 Pages
Heat Recovery8 Pages
Water Treatment Systems12 Pages
Energy Recovery Solutions16 Pages
SCR4 Pages
ProFire Burner Retrofit8 Pages
Exhaust Solutions8 Pages
Corporate Brochure16 Pages
Profire Burner Solutions12 Pages
Electric Boiler4 Pages
FLX Flextube8 Pages
ProFire V-Series5 Pages
Electrode Boiler4 Pages
ADAC2 Pages
4WI - CBLE8 Pages
Clearfire C Brochure8 Pages
CBR4 Pages
ICB8 Pages
CBL4 Pages
CB 15 - 100 HORSEPOWER2 Pages
Ohio Special4 Pages
INDUSTRIAL WATERTUBE BOILERS12 Pages
CB Accu-Draft2 Pages
CB-8316 ProFire-MTH4 Pages
CB-8518 ProFire-Q Series4 Pages
hawk contol system8 Pages
Model CBEX Elite 100-800 HP74 Pages
natcom burner solutions16 Pages
PROFIRE® NTH burners4 Pages
CBEX Elite Brochure12 Pages
- Vessel
- Storage vessel
- Metal tank
- Volumetric dosing unit
- Liquids dispensing system
- Filtration unit
- Horizontal tank container
- Automatic dispensing system
- Water tank
- Gas burner
- VOC-free liquid filtration unit
- Direct fired burner
- Pressure tank
- Steam boiler
- Superheated water boiler
- Gas boiler
- Natural gas burner
- Recuperator
- Nozzle mix burner
- Other applications control system