Packaged Water Systems Condensate Return System CONDENSATE RETURN SYSTEM PRODUCT GUIDE Standard Units Include: • Carbon Steel Receiver Tank • Vertical Immersion Pump(s) • Float Switch/Mechanical Alternator Cleaver-Brooks Vertical Immersion Pump and Motor: Our standard system includes Vertical Immersion pumps, which do not require an isolation valve, eliminates the need to drain the system for maintenance and require a smaller footprint. These pumps are Cast Iron-Stainless Steel Construction with a wide range of pump sizes and multiple stages. Pumps operate at numerous duty points and pressures. They are built with a standard pump mounting plate for ease of removal and installation. Condensate Return Tank Options: • Pump Control • Square D: Standard • Warrick Probe: Optional • Control Panel • 3 Phase: Standard • 1 Phase: Optional • Required with the Warrick Probe • Thermometer • Sight Glass • Pump Discharge Pressure Gauge • Pump Suction Pressure Gauge • Inlet Y-Strainer • Stainless Steel Tank - Special Quotation Model Number Description: CRS-D25-4-5 • CRS – Condensate Return System • D - Duplex • 25 - Tank Capacity • 4-5 - Pump Model (SPK) 1 Rev. 04-11

Packaged Water Systems Condensate Return System Condensate Return System Sample Specifications PART I GENERAL 1.1 GENERAL A. The following sample specifications are provided by Cleaver-Brooks to assist you in specifying your customer's specific needs and application B. Condensate Return Systems shall be Cleaver-Brooks Model (Specify simplex, or duplex) suitable for gpm, at a discharge pressure of psig (refer to Selection Table above). PART 2 PRODUCTS 2.1 SYSTEM COMPONENTS A. The unit shall consist of the following components: 1. One (substitute two for duplex) Vertical Immersion Pumps, which...