Catalogs >
CLAYTON INDUSTRIES >
Model E1104, 1100 BHP Steam Generator

Model E1104, 1100 BHP Steam Generator
2Pages

Catalog excerpts

Model E1104, 1100 BHP Steam Generator - 1

MODEL E1104-DZ FLUID HEATER 1,100 BHP Standard and FMB CLAYTON STEAM GENERATORS OFFER: • COMPACT SIZE Clayton steam generators will normally fit in any available area while also reducing construction costs on new building installations. . FUEL EFFICIENT High efficiency which is inherent with the clayton design translates into lower operating costs and improved overall system operation . RESPONSIVE Very rapid response to changing steam loads. Clayton steam generator will automatically modulate to match your steam load profile while maintaining system steam pressure . SAFE Our once through design eliminates the possibility of a steam or water side explosion. The Clayton steam generator is simply the safest steam boiler on the market. . LESS WATER WASTE Clayton’s design concentrates TDS blow down significantly which reduces wasted fuel, water and chemical costs. . FAST START Full steam pressure and output in minutes from a cold startup saves fuel and labor cost over conventional designs. Eliminates wasted fuel from idling. . AUTOMATIC Operation is automatically controlled and the Clayton steam generator can be started from a single switch or remotely using an automatic start option. . LOW WEIGHT The relatively light weight means that all sizes of Clayton steam generators can be easily moved and installed even in areas with limited structural support. • RELIABLE Reliability of the Clayton steam generator is field proven and unsurpassed. This results in greatly reduced maintenance and attendance. • HIGH QUALITY STEAM Steam Quality in excess of 99.5% dry is assured at all times. This is the highest steam quality of any competitive design. Less water and impurities further increase your energy efficiency.

Open the catalog to page 1

Model E1104, 1100 BHP Steam Generator - 2

MODEL E1104 BOILER HORSEPOWER HEAT INPUT, BTU/hr. Oil Gas NET HEAT OUTPUT, BTU/hr. EQUIVALENT OUTPUT (from and at 212°F feedwater and 0 PSIG steam) DESIGN PRESSURE (see note 1) STEAM OPERATING PRESSURE (determined by design pressure) OIL CONSUMPTION at maximum steam output (see note 2) GAS CONSUMPTION at maximum steam output (see note 3) BURNER CONTROLS modulating EFFICIENCY oil-fired efficiency % gas-fired efficiency % ELECTRIC MOTORS, HP (see note 4) design pressure 15-300 psig design pressure 301-500 psig ELECTRIC FLA, based on 460 V (see note 5) design pressure 15-300 psig design...

Open the catalog to page 2