Technical Specifications for Flexible Hose Cutting Machine (up to 2" / 4 wires)

General Description

This document describes a bench-top model machine designed for bending and cutting flexible hoses with a maximum diameter of 100 mm.

Key Features

• Manual control with a single lever to perform both bending and cutting operations.
• Equipped with a high torque electric motor rated at 4 kW, operating at 400V, TRI, 50Hz, three-phase power supply.
• Direct motor starting with built-in heat sensor protection to prevent overheating.
• Bevelled cutting blade dimensions: 400 mm diameter, 4 mm thickness, and 30 mm width.

Physical Characteristics

• Dimensions (Height x Width x Length): 500 mm x 600 mm x 730 mm.
• Weight: 85 kg.

Critical Parameters and Limitations

• Maximum cutting diameter is limited to 100 mm, suitable for hoses up to 2 inches with 4 wire reinforcement.
• Manual operation requires operator control for bending and cutting.

Recommendations and Best Practices

• Ensure the power supply matches the specified 400V, three-phase, 50Hz requirements.
• Monitor the heat sensor to avoid motor overheating during prolonged use.
• Use the single lever control carefully to perform precise bending and cutting.