Overview

This document describes a mechanical system designed for uncoiling flexible hoses upstream of an automatic machine. The equipment is robustly constructed and includes features to facilitate handling, installation, and operation.

Design and Construction

• The system features a sturdy design with four feet to ensure stability and ease of ground fixing.
• It includes a removable housing that allows easy installation of crowns with diameters ranging from 250 to 600 mm.
• An optional integrated control loop is available to enhance operational control.

Technical Specifications

• Operation is pedal-operated for user convenience.
• Powered by a 0.75 kW three-phase gear motor running on 400V three-phase power supply.
• Maximum coiler speed ranges from 4 to 24 revolutions per minute (rpm).
• Working height is set at 1010 mm to suit ergonomic requirements.
• The tray can support a maximum load of 400 kg.
• Overall dimensions are 1500 mm (height) x 1600 mm (width) x 1600 mm (length).
• The total weight of the equipment is 350 kg.

Critical Parameters and Recommendations

• Ensure proper ground fixing using the four feet to maintain stability during operation.
• Use the removable housing feature to accommodate different crown sizes efficiently.
• Operate the system using the pedal control for safety and ease of use.
• Observe the maximum load limit of 400 kg on the tray to avoid mechanical failure.
• Maintain the motor and control loop (if installed) according to manufacturer guidelines to ensure reliable performance.