Filter Housing Materials 316L Stainless Steel SS119 series filter housings are specified for 1/8" & 1/4" line size applications up to 700 Bar where response times are critical. If the flow rate or contamination is higher, or where service intervals must be kept as long as possible, the SSI 29 series housings should be considered. For ap- plications less than 340 Bar see the SS117 series housings. Standard housings have NPT ports and a Viton seal. Other seal types are available as an option. BSPTand BSPP port types are also available. The housings are free from welds and comply with NACE MR-01-75 and are CE marked in accordance with PED These housings can also be supplied in a wide range of exotic materials, such as Hastelloy, Monel,Titanium etc. Technical Specifications Housing Model Port Size Head, Bowl & Internals Filter Elements Code (5) Adsorber Cartridge Code (6) Support Core Mounting Bracket (1) Above 200°C the pressure rating is reduced, consult us for the exact rating at any specific temperature (2) Maximum temperature 200°C using standard seal. For temperatures up to 324°C use a Chemraz sea (3) Material abbreviations, 316L SS = 316L Stainless Steel [4) Add suffix for other seal types, PTFE = .T, Chemraz = .C, Nitrile = N, Kalrez = .K, EPDM = .E, Silicone = .S, (e.g. SSI 19.221 .T) [5)Replacethe □ with the grade required, e.g. 12.32.5CK, 12.32.S20V, 12.32.T20 (6) Replacethe □ with the type required, e.g. 12.32.AS01

Sextant Park Neptune Close