Catalogs >
Classic Filters >
Adsorption Cartridges for Housings

Adsorption Cartridges for Housings
2Pages

Catalog excerpts

Technical Specifications Adsorber Cartridges Vapour Adsorption Coalescing filter elements will only remove liquid aerosols and droplets. If there is a liquid in vapour form to be removed then an adsorber cartridge should be used in an additional housing as a final stage. Adsorption cartridges can also be used to remove elements of a gas, for example acidic gases. A range of adsorber materials are available and these are listed Cartridge Types We have three different styles of adsorber cartridge available - each designed for a particular filter housing. The AD and AT types can be installed into a standard housing. The AS is designed for small stainless steel housings and to install this type the housing tie rod Refer to the housing data sheets to select the correct size and type of cartridge required. Filter Pads Adsorber (see table below) Microfibre Filters Standard Sizes Grade Adsorber 01 Activated Carbon Granules 02 Activated Carbon Cloth 06 Mixed Bases (Soda Lime) Principle Uses Removal of hydrocarbons and other organic vapours Removal of hydrocarbons and other organic vapours Removal of C02, NH3, H2S, SOx, aromatics, amines Removal of water vapour Removal of acidic gases, C02, SOX, NOX, HCI Removal of SOX and other acidic gases (1) Replace the □ with the adsorber required, e.g. 12.57.AS01

Open the catalog to page 1