TYPICAL APPLICATIONS • Water purification • Laser cooling • Water circulation • Condensation removal • Low pressure carbonation DESCRIPTION The DGM09 Series magnet drive gear pumps derive from the well established mag drive MG200 Series. Built to handle clean water and relatively viscous fluids at low pressure, the DGM09 Series pump-motor unit has low pulsation and is capable of handling fluids at a maximum temperature of 95°C (203°F). The pump housing and the gears are made of Vectra. Seals are available in NBR, EPDM or VITON®. The extreme compactness of its design makes it the preferred choice where space is limited. Suction/discharge ports are 8 mm barbed end. Motor: 12 or 24 V DC brush type Speed: 3000 rpm Weight: 0.55 Kg ( 1.21 Lbs) DIMENSIONS (MM) ORDERING INFORMATION EXAMPLE MODEL NUMBER: DGM 09 E M01 Clark Solutions • 10 Brent Drive • Hudson, MA 01749 • Tel. 978 / 568 3400 • Fax 978 / 568 0060