Catalogs >
Clark >
9QX Series

9QX Series
2Pages

Catalog excerpts

9QX Series Peristaltic Pumps DC Gear or Stepper Motor, Liquid Flow to 200 ml/min DESCRIPTION The 9QX is the smallest flip-top peristaltic pump available. With an elegant body design of just 40 x 62 mm (width x height) it stands just 21.5mm (depth) off a panel mount. The flip-top design allows tube loading and unloading with ultimate ease. This series is the 3rd generation of the highly successful 9K miniature peristaltic pump from Boxer and is designed for accurate dispensing of liquids. DC / Gear motor versions offer a range of 33 to 520 rpm with optional shaft encoder providing accurate feedback of rotor speed. Stepper motors versions offer the versatility of finite speed / flow control with supporting drivers and optional rotor encoder. SPECIFICATIONS MOTOR DC Gear Motor: 12 VDC or 24 VDC DC Gear Motor RPM: 12 V- 116, 315 or 520 24 V- 33/107, 315 or 520 DC Motor Life: >2000 hours DC Motor Power Consumption: 3.5 to 5 Watts Stepper Motor RPM: to 500 rpm dependent on tube size and number of rollers Stepper Motor: NEMA 17, 24 VDC Stepper Motor Power Consumption: 8 Watts (2 A driver recommended, current limiter should be used for low speed operation. Stepper Motor Life: >10,000 hours GENERAL Max. Pressure: 1 bar (14.7 PSI) Max. Vacuum: -950 mbar (28.1 inches Hg) Max Ambient Temp: 60oC Flow Data: 0.5 mm ID Tube- 16/15/13 µl per rev. (3/4/6 rollers) 1 mm ID Tube- 55/50/42 µl per rev. (3/4/6 rollers) 2 mm ID Tube- 190/160/120 µl per rev. (3/4/6 rollers) 3 mm ID Tube- 340/290/200 µl per rev. (3/4/6 rollers) 3.5 mm ID Tube 400/340/230 µl per rev. (3/4/6 rollers) Tube Materials: Silicone, Lagoprene, Pharm-a-line, ED-Plex Weight: DC Motor,130g; Stepper Motor, 245 g Options: Back shaft motor encoder,10 pulses per motor revolution (consider gearbox ratio for pulses per pump rotor revolution) BACK SHAFT ENCODER 9QX Flip Top Tube Loading DIMENSIONS (MM) WITH DC MOTOR Shaft Encoder Pin Assignments Motor Motor Hall Sensor Hall Sensor Hall Sensor A Hall Sensor B Clark Solutions 10 Brent Drive

Open the catalog to page 1

DIMENSIONS (MM) WITH STEPPER MOTOR NEMA 17 STEPPER MOTOR CONTROLLERS ROTATIONAL SPEEDS TO 780 RPM UIM24302B Integrated Stepper Motor Cotroller UIM24302B stepper motor controller is a microprocessor embedded, voltage control, miniature stepper motor controller. With the UIM24302B, the motor speed can be controlled by an analog voltage via an external potentiometer or an external voltage . Run/stop, direction, high/low speed range and, enable/disable can be controlled simply by shorting the corresponding terminal to the ground. UIM24302B can provide 0 - 2A adjustable phase current. Their...

Open the catalog to page 2

9QX Series 2Pages

Catalog excerpts

All Clark catalogs and technical brochures

9QX Series
2Pages