Catalogs >
CLARK Material Handling >
Specification sheet WSX12/14 WSXD20

Specification sheet WSX12/14 WSXD20
6Pages

Add to favorites

Catalog excerpts

WSX12/14 WSXD20 Electric Stacker Trucks 1.200 kg 1.400 kg 2.000 kg

Open the catalog to page 1

For corresponding data see specification chart.

Open the catalog to page 2

*1) Further lift heights see upright table *2) At friction coefficient q=0.6 with 1.6 km/h *3) Valid with 1200 kg load in stacker mode In accordance with VDI Guideline 2198 this specification sheet provides details on the standard truck only. Non-standard tyres, different masts, optional equipment, etc. may result in different values.

Open the catalog to page 3

WSX12/14 Benefits The high lift stacker trucks WSX12 and WSX14 are suited for short distance use wherever goods need to be transported up to a lifting height of 4800 mm. The compact dimensions of the WSX12 and WSX14 facilitate safe handling and are also well suited for narrow aisle use. When loads are being lifted, the CLARK SpeedControl safety function adapts the speed in relation to the tiller arm position which increases safety. A further highlight of the WSX12/14 is the standard side battery removal system, allowing for quick battery change. WSXD20 Benefits The WSXD20 is a...

Open the catalog to page 4

GENERAL DATA Upright table WSX12 Mast type Upright table WSX14 Mast extended (h4) Mast type Upright table WSXD20 Mast type CLARK SpeedControl (CSC) The series standard safety SpeedControl function aids manoeuvring and is ideal for working in confined areas. The automatic set maximum travel speed is dependent on the tiller arm position. When the tiller arm is positioned in area (S), the CLARK SpeedControl adjusts travel speed, resulting in optimum safety and quick response. With the tiller arm in the normal travel position (K), maximum travel speed is set. Braking is initiated as soon as the...

Open the catalog to page 5