1. Catalogs
  2. CLARK Material Handling
  3. Specification sheet S20-32C
video corpo

Specification sheet S20-32C
1 /6Pages

Specification sheet S20-32C

Specification sheet S20-32C
1 /6Pages

Catalog excerpts

Specification sheet S20-32C-1

S20C/25C/30C/32C LPG engine Cushion Tyres 2000 kg 2500 kg 3000 kg 3200 kg

 Open the catalog to page 1
Specification sheet S20-32C-2

For corresponding data see specification chart.

 Open the catalog to page 2
Specification sheet S20-32C-3

*1 Different tyre types available *2 Futher lift heights see upright table *3 with 1.6 km/h Without load at friction coefficient |j=0.8 *4 Equivalent permanent sound-pressure level L pAeq, T in accordance with DIN EN 12053 (previosly DIN 45635-36) *5 Values for Wide Drive Tyre (Option) *6 LPG= Stage 4 *7 Max. 140 bar All values shown are for standard lift truck with standard equipment. If the truck is supplied with options, values may change. All values given may vary + 5 % and - 10 % due the motor and system tolerances and represent nominal values obtained under typical operating conditions.

 Open the catalog to page 3
Specification sheet S20-32C-4

The S-Series from CLARK marks a further development in reliable, durable and powerful forklifts. Lower operating and maintenance costs combined with a well-designed and ergonomic operator compartment are what makes this forklift truly unique. Driver Environment • Functional, safe with minimal vibrations • Low positioned perforated non-slip metal step • Fully covered anti-slip rubber foot area • A grab handle on the driver side of entry makes it easy to climb up and down • Adjustable steering column allows more leg and foot room • Small steering wheel diameter (0=300 mm) • Hydraulic power steering...

 Open the catalog to page 4
Specification sheet S20-32C-5

Truck Capacities Capacity at different load centres 4000 Note: The listed capacities are valid only for the standard upright in vertical position with standard fork carriage and standard forks, up to max. lifting height of 3300 mm. The centre of gravity of the load may be displaced by max. 100 mm against the longitudinal centre plane of the truck. Load centre is determined from top and front face of the forks. The values are based on a 1000 mm cube load configuration with the centre of gravity at the true centre of the cube. With upright tilted forward lower capacity values are valid. Attachments,...

 Open the catalog to page 5
Specification sheet S20-32C-6

CLARK Europe GmbH Dr.-Alfred-Herrhausen-Allee 33 47228 Duisburg / Germany Tel.: +49 (0)2065 499 13-0 Fax: +49 (0)2065 499 13-290 E-Mail: [email protected] www.clarkmheu.com

 Open the catalog to page 6

All CLARK Material Handling catalogs and technical brochures

  1. SX 12/16

    6  Pages

Archived catalogs

  1. WPX18

    8  Pages

  2. WPio12

    2  Pages

  3. GEX 40/45/50

    8  Pages

  4. C40-55s

    8  Pages

  5. GTS20-33

    8  Pages

  6. WS 10M

    8  Pages

  7. WS 10

    8  Pages

  8. WSX 12/14

    8  Pages

  9. WSXD 20

    8  Pages

  10. SRX 14/16

    8  Pages

  11. WS & SX

    8  Pages

  12. WP & PX

    8  Pages

  13. PX20

    8  Pages

  14. CTX 40/70

    8  Pages

  15. WP15

    8  Pages

  16. WSXD20

    8  Pages

  17. CQ 20/25/30

    6  Pages

  18. CRT 13/16K ac

    8  Pages

  19. EPX 16/18/20s

    5  Pages

  20. CRX Series

    6  Pages

  21. Clark C 20-35

    16  Pages

  22. CLARK C60-80

    8  Pages

  23. Brochure CRX

    6  Pages

  24. New GEX 20-30

    10  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.