Catalogs >
CLARK Material Handling >
Specification sheet GTS20-33

Specification sheet GTS20-33
6Pages

Add to favorites

Catalog excerpts

Diesel or LPG engine Pneumatic or Superelastic Tyres 2.000 kg 2.500 kg 3.000 kg

Open the catalog to page 1

Ast = Wa + x + l6 + a b12 – applies only if – < b13 2 b12 – ( l6 + x)2 + – – b13 2 b12 – > applies only if – – b13 2 For corresponding data see Specification Chart.

Open the catalog to page 2

1.1 Manufacturer (Abbreviation) CLARKCLARKCLARKCLARK *1) Optional with super-elastic tyres *2) Futher lift heights see upright table *3) At friction coefficient p = 0.6 and laden with 1.6 km/h *4) Diesel = Yanmar (Stage 3a) or ISUZU (Stage 3b) LPG = PSI (Stage 5) *5) Equivalent permanent sound-pressure level L pAeq, T in accordance with DIN EN 12053 *6) With load backrest *7) Height with cabin and radio antenna + 60 mm *8) Max. 140 bar

Open the catalog to page 3

*1) Optional with super-elastic tyres *2) Futher lift heights see upright table *3) At friction coefficient p = 0.6 and laden with 1.6 km/h *4) Diesel = Yanmar (Stage 3a) or ISUZU (Stage 3b) LPG = PSI (Stage 5) *5) Equivalent permanent sound-pressure level L pAeq, T in accordance with DIN EN 12053 *6) With load backrest *7) Height with cabin and radio antenna + 60 mm *8) Max. 140 bar Performance may vary + 5 % and - 10 % due to motor and system efficiency tolerance. The performance shown represents nominal values which may be obtained under typical operating conditions of a machine. CLARK...

Open the catalog to page 4

Truck Capacities Capacity at different load centres Note: The listed capacities are valid only for the standard upright in vertical position with standard fork carriage and standard forks, up to max. lifting height of 3195 mm for GTS20/25/30 and 3165 mm for GTS33. The centre of gravity of the load may be displaced by max. 100 mm against the longitudinal centre plane of the truck. Load centre is determined from top and front face of the forks. The values are based on a 1000 mm cube load configuration with the centre of gravity at the true centre of the cube. With upright tilted forward lower...

Open the catalog to page 5

The GTS20-33 series from CLARK is a reliable, durable and powerful range of vehicles featuring high quality equipment. This combustion engine series boasts top-quality features as standard, e.g. wet disc brakes, optimally configured engines and the usual high-quality CLARK uprights with damping system when lifting and lowering. Lower overall operating costs (TCO) combined with a well-designed and ergonomic driver’s compartment further enhance the appeal of this forklift. The tough metal and vinyl parts central to its sturdy, Built to Last ® design concept ensure that these forklifts will...

Open the catalog to page 6