Catalogs >
CLARK Material Handling >
Specification sheet EPX20-32i

Specification sheet EPX20-32i
6Pages

Add to favorites

Catalog excerpts

Electric Lift Trucks Superelastic Tyres 2.000 kg 2.200 kg 2.500 kg 3.000 kg 3.200 kg

Open the catalog to page 1

For corresponding data see Specification

Open the catalog to page 2

*1 Further lift heights see upright table *2 At friction coefficient g=0.8 with 1.6 km/h *3 acc. to DIN EN 12053 All values shown are for standard lift truck with standard equipment. If the truck is supplied with options, values may change. All values given may vary + 5 % and - 10 % due the motor and system tolerances and represent nominal values obtained under typical operating conditions. Specifications for Non-emission limited truck.

Open the catalog to page 3

*1 Further lift heights see upright table *2 At friction coefficient p=0.8 with 1.6 km/h *3 acc. to DIN EN 12053 All values shown are for standard lift truck with standard equipment. If the truck is supplied with options, values may change. All values given may vary + 5 % and - 10 % due the motor and system tolerances and represent nominal values obtained under typical operating conditions. Specifications for Non-emission limited truck.

Open the catalog to page 4

Truck Capacities Capacity at different load centres Note: The listed capacities are valid only for the standard upright in vertical position with standard fork carriage and standard forks, up to max. lifting height of 3300 mm (3165 mm). The centre of gravity of the load may be displaced by max. 100 mm against the longitudinal centre plane of the truck. Load centre is determined from top and front face of the forks. The values are based on a 1000 mm cube load configuration with the centre of gravity at the true centre of the cube with upright tilted forward lower capacity values are valid....

Open the catalog to page 5

PRODUCT DESCRIPTION The EPX20i-32i series CLARK forklift is a quiet, non-polluting operation alternative to internal combustion engine trucks, The robust electric counterbalanced range trucks are suitable for most applications with handling capacities from 2,0 to 3,2 tons. A solid” built to last “construction with a well-designed driver compartment makes the Clark EPX20-32i series the truck you need to operate in a smart and safe manner over long periods. Operator’s Compartment A large low positioned step, together with a grab handle on the driver’s guard column allows easy access to the...

Open the catalog to page 6