Specification sheet CLARK GTX16/18/20s

Product catalog summary

Hydraulic System
The hydraulic system is designed for energy efficiency with an AC-powered pump that operates only as needed. It includes a low-noise internal gear pump and a steel hydraulic tank for effective heat dissipation, enhancing the system's longevity. Full-flow return line filtration is used to extend the life of hydraulic components.

Upright and Forks
The system offers clear-view uprights in Standard, Hilo, and Triplex versions, ensuring strength and safety. Features include enclosed canted rollers, spherical bushings for tilt cylinders, and a hydraulic cushioning valve for smooth operation. The forks are upset forged, hook-mounted, and pin-lockable for durability.

Standard and Optional Equipment
Standard equipment includes headlights, acoustic reversing alarms, and safety-colored paintwork. Optional equipment includes different tire types, side battery change, and various attachments.

Safety and Certification
The GTX series is CE certified, complying with European safety standards for counterbalanced forklift trucks.

Dimensions and Specifications
Specifications for models GTX16, GTX18, and GTX20s include details on weight, dimensions, performance, and drive line characteristics, with variations due to motor and system tolerances.

Operator’s Compartment
The compartment is ergonomically designed with adjustable seating, a clear TFT LCD display for real-time data, programmable operating modes, and accessible controls.

Motor, Drive, and Control
The GTX series features two AC motors with 48 Volt three-phase technology. The ZAPI DUAL AC control system uses MOSFET and CAN bus technology for efficient operation.

Brake System
Three independent brake systems ensure safety, including regenerative electrical brakes that return energy to the battery.

Steering System
The dual-wheel steer axle improves maneuverability and stability, with automatic speed adjustments to reduce tire wear.

Specifications
The document details specifications for CLARK electric lift trucks with superelastic tyres, specifically models GTX16/18/20s, including maximum lifting height and load center configurations.

Truck Capacities
Capacities are specified for different load centers and mast types, with variations based on mast height and load backrest usage.

Performance Notes
Performance may vary by +5% and -10% due to motor and system efficiency tolerance. Attachments and exceptional load dimensions can reduce capacity.

Contact Information
For more information, contact CLARK Europe GmbH at Neckarstraße 37, D - 45478 Mülheim an der Ruhr, Tel. +49 208 377336 0, Fax +49 208 377336 36, or email [email protected].

Catalog excerpts

Specification sheet CLARK GTX16/18/20s-1

GTX16/18/20s Electric Lift Trucks Superelastic Tyres 1.600 kg 1.800 kg 2.000 kg

Open the catalog to page 1

Specification sheet CLARK GTX16/18/20s-2

For corresponding data see Specification Chart.

Open the catalog to page 2

Specification sheet CLARK GTX16/18/20s-3

Drive line Tyres, Chassis Product Specifications acc. to VDI 2198 1.1 Manufacturer (Abbreviation) 1.2 Manufacturer’s designation 1.3 Drive unit 1.4 Operator type stand on / driver seated 1.5 Load capacity / rated load Q (Kg) 1.6 Load centre distance c (mm) 1.8 Load centre distance, centre of drive axle to fork face x (mm) 1.9 Wheelbase y (mm) 2.1 Service weight Kg 2.2 Axle loading, laden front / rear Kg 2.3 Axle loading, unladen front / rear Kg 3.1 Tyre type, SE = superelastic, C = cushion 3.2 Tyre size, front, superelastic 3.3 Tyre size, rear, superelastic 3.5 Wheels, number front/rear (x =...

Open the catalog to page 3

Specification sheet CLARK GTX16/18/20s-4

PRODUCT DESCRIPTION Two powerful AC motors driving the front wheels, a very sturdy design without unnecessary plastic components and an extremely short wheelbase, distinguish the GTX series from CLARK. Suitable for most applications thanks to a solid „built to last“ construction and well thought-out driver‘s compartment. Operator’s Compartment A large low positioned step, together with a grab handle on the drivers guard column allows easy access to the ergonomically designed operator’s compartment. A full width rubber floor covering in the footwell ensures a firm footing in all conditions. The...

Open the catalog to page 4

Specification sheet CLARK GTX16/18/20s-5

GENERAL DATA Truck Capacities Capacity at different load centres Note: The listed capacities are valid only for the standard upright in vertical position with standard fork carriage and standard forks, up to max. lifting height of 3085 mm. The centre of gravity of the load may be displaced by max. 100 mm against the longitudinal centre plane of the truck. Load centre is determined from top and front face of the forks. The values are based on a 1000 mm cube load configu-ration with the centre of gravity at the true centre of the cube With upright tilted forward lower capacity values are valid....

Open the catalog to page 5