front / rear front / rear front / rear 1.2 Manufacturer's model designation 1.4 Type of control : S (steering wheel) R (seated) 1.6 Load centre distance 1.8 Load distance, centre of drive axle to fork Mast advanced 2.1 Service weight ( battery included ) 2.3 Axle loading mast retracted (without load) 2.4 Axle loading mast advanced (with load ) 2.5 Axle loading mast retracted (with load ) 3.1 Tyres: vlk ( vulkollan ) se ( superelastic) 3.2 Front wheels size 3.3 Rear wheels size 3.5 Wheels : number front / rear (x = traction ) 3.7 Rear track width 4.1 Mast / fork carriage tilted forward / backward 4.2 Lowered mast height 4.5 Extended mast height 4.7 Overhead guard ( cab) height 4.20 Length to forks face 4.23 Fork carriage, class / type A, B 4.24 Fork carriage width 4.25 Width over forks 4.26 Distance between support arms / loading surfaces 4.33 Aisle width with pallets 1000 x 1200 forking side 1200 4.34 Aisle width with pallets 800 x 1200 forking side 800 4.37 Length across wheel arms 5.10 Service brake M ( mechanical) I ( hydraulic) IV (inversion braking ) 6.1 Traction motor, rating S2 60 min 6.2 Lifting motor, rating S3 15% 6.4 Battery voltage, nominal capacity K5 [3 8.1 Type of travel control fM 8.2 Operating pressure for attachments M 8.3 Oil volume for attachments ( max available) | 8.4 Sound level at driver's ear Technical specification according VDI 2198 laden / unladen laden / unladen laden / unladen All values shown are for standard lift truck with standard equipment. If the truck is supplied with options, values may change. All values given may vary +5% and -10% due the motor and system tolerances and represent nominal values obtained under typical operating conditions_