Catalogs >
CLARK Material Handling >
Specification sheet CLARK C OP 02

Specification sheet CLARK C OP 02
1Pages

Catalog excerpts

Technische Daten fur das Standardgerat nach VDI 2198 1.2 Manufacturer's model designation 1.4 Type of control : S (steering wheel) P (standing) 1.6 Load centre distance 1.8 Load distance, centre of drive axle to fork 2.1 Service weight ( battery included ) 2.2 Axle loading mast (with load ) front / rear 2.3 Axle loading mast (without load ) front / rear 3.1 Tyres : vlk (vulkollan ) pit ( polyurethane ) 3.2 Front wheels size 3.3 Rear wheels size 3.5 Wheels : number front / rear (x = traction ) 3.7 Rear track width 4.2 Lowered mast height 4.5 Extended mast height 4.7 Overhead guard height 4.8 Seat height / standing height 4.14 Standing height, elevated 4.19 Overall length (without load ) 4.20 Length to forks face 4.24 Fork carriage width 4.25 Width over forks 4.27 Width over side rollers 4.31 Ground clearance, under mast laden 4.32 Ground clearance laden 4.34 Aisle width with pallets 1000 x 1200 forking side 1200 Aisle width with pallets 1000 x 1200 forking side 800 4.39 Total lifting height 4.44 Operator's working place width Platform's Length / height / width 5.1 Travel speed laden / unladen 5.2 Lifting speed laden / unladen 5.3 Lowering speed laden / unladen 5.10 Service brake M ( mechanical) I (hydraulic ) IV (inversion braking ) 5.11 Parking brake EM (electromagnetical) 6.1 Traction motor, rating S2 60 min 6.2 Lifting motor, rating S3 15% 6.4 Battery voltage, nominal capacity K5 8.1 Type of travel control 8.4 Sound level at driver's ear All values shown are for standard lift truck with standard equipment. If the truck is supplied with options, values may change. All values given may vary +5% and -10% due the motor and system tolerances and represent nominal values obtained under typical operating conditions.

Open the catalog to page 1