Catalogs >
CLARK Material Handling >
Specification sheet CLARK C OP 01

Specification sheet CLARK C OP 01
1Pages

Catalog excerpts

1.2 Manufacturer's model designation COPOI 1.4 Type of control : S (steering wheel) P (standing) S / P 1.6 Load centre distance c ( mm ) 600 1.8 Load distance, centre of drive axle to fork X(mm) 120 2.1 Service weight (battery included) Kg 1.400 2.2 Axle loading mast (with load) front/rear Kg 360/2.060 2.3 Axle loading mast (without load) front/rear Kg 946/454 3.1 Tyres: vlk (vulkollan ) pit ( polyurethane ) pit 3.2 Front wheels size mm 256 3.3 Rear wheels size mm 150 3.5 Wheels : number front / rear (x = traction ) 1x/2 3.7 Rear track width b10(mm) 4.2 Lowered mast height hi (mm ) 1.070 4.5 Extended mast height h4 (mm ) 2.270 4.7 Overhead guard height h6 ( mm ) 4.8 Seat height/standing height h7 ( mm ) 250 4.14 Standing height, elevated h12(mm) 1.290 4.19 Overall length (without load) 11 (mm ) 2.960 4.20 Length to forks face 12 (mm ) 1.810 4.24 Fork carriage width b3 (mm ) 770 4.25 Width over forks b5 (mm ) 540 4.27 Width over side rollers b6 ( mm ) 4.31 Ground clearance, under mast laden ml (mm ) 4.32 Ground clearance laden m2 (mm ) 40 4.34 Aisle width with pallets 1000 x 1200 forking side 1200 Ast(mm) Aisle width with pallets 1000x1200 forking side 800 Ast(mm) 3.210 4.39 Total lifting height h3 ( mm ) 1.040 4.44 Operator's working place width (mm) 720 Platform's Length / height / width (mm) 720/770 | 5.1 Travel speed laden / unladen Km / h 9/9.5 .2 Lifting speed laden/ unladen m/s 0.19/0.23 .3 Lowering speed laden / unladen m/s 0.33 / 0.25 10 Service brake M ( mechanical) I ( hydraulic) IV (inversion braking) IV 11 Parking brake EM (electromagnetical) EM .1 Traction motor, rating S2 60 min KW 2.6 .2 Lifting motor, rating S3 15% KW 3 .4 Battery voltage, nominal capacity K5 V/Ah 24/460 .1 Type of travel control MOS DC .4 Sound level at driver's ear dB (A) < 70 Technical specification according VDI 2198_ All values shown are for standard lift truck with standard equipment. If the truck is supplied with options, values may change. All values given may vary +5% and -10% due the motor and system tolerances and represent nominal values obtained under typical operating conditions._ s=standard o=option

Open the catalog to page 1