Catalogs >
CLARK Material Handling >
Specification sheet CGC40-70

Specification sheet CGC40-70
6Pages

Add to favorites

Catalog excerpts

CGC40/50/55 CGC60/70 LPG engine Cushion Tyres 4.000 kg 5.000 kg 5.500 kg 6.000 kg 7.000 kg

Open the catalog to page 1

Wa For corresponding data see specification chart.

Open the catalog to page 2

*1 Different tyre types available *2 Futher lift heights see upright table *3 with 1.6 km/h Without load at friction coefficient |j=0.8 *4 Equivalent permanent sound-pressure level L pAeq, T in accordance with DIN EN 12053 (previosly DIN 45635-36) *5 LPG= Stage 5 *6 Max. 140 bar All values shown are for standard lift truck with standard equipment. If the truck is supplied with options, values may change. All values given may vary + 5 % and - 10 % due the motor and system tolerances and represent nominal values obtained under typical operating conditions.

Open the catalog to page 3

*1 Different tyre types available *2 Futher lift heights see upright table *3 with 1.6 km/h Without load at friction coefficient p=0.8 *4 Equivalent permanent sound-pressure level L pz T in accordance with DIN EN 12053 (previosly DIN 45635-36) *5 LPG= Stage 5 *6 Max. 140 bar All values shown are for standard lift truck with standard equipment. If the truck is supplied with options, values may change. All values given may vary + 5 % and - 10 % due the motor and system tolerances and represent nominal values obtained under typical operating conditions.

Open the catalog to page 4

Truck Capacities Capacity at different load centres 7500 6500 o> c 5500 4500 3500 2500 1500 GENERAL DATA Note: The listed capacities are valid only for the standard upright in vertical position with standard fork carriage and standard forks, up to max. lifting height of 3300 mm. The centre of gravity of the load may be displaced by max. 100 mm against the longitudinal centre plane of the truck. Load centre is determined from top and front face of the forks. The values are based on a 1000 mm cube load configuration with the centre of gravity at the true centre of the cube. With upright...

Open the catalog to page 5

THE FORKLIFT With the CLARK CGC-series, reliable, durable and hight-performance trucks have been designed for space-critical applications with heavy loads. Low operationg and maintence costs as well as a welldesigned workplace set these forklift trucks apart. Driver Environment • Functional and secure • Large, low step with perforated plate • Stable non-slip rubber floor covering in the footwell • Handle on the front spar on the entry side • Safe climbing up and down on both sides • Tilting steering column with top bending point for excellent knee and legroom • Hydraulic power steering •...

Open the catalog to page 6