Specifications and Performance:
The CLARK C15-20s series forklifts exhibit performance variability of +5% to -10% due to motor and system efficiency tolerances. Nominal values are based on typical operating conditions, with capacities valid for standard configurations. Deviations in load center or use of attachments may reduce capacity.

General Data:
Part of CLARK's Gen2 series, these forklifts are known for reliability and durability, featuring diesel or LPG engines, and pneumatic or superelastic tires. They offer capacities of 1,500 kg, 1,800 kg, and 2,000 kg.

Driver's Compartment:
The ergonomically designed compartment includes a non-slip step, grab handle, rubber floor covering, adjustable steering column, and a comfortable seat. Control levers are cowl-mounted with international symbols, and a clear display provides real-time data.

Engine and Transmission:
Powered by a Yanmar diesel engine or an LPG engine, both connected to a CLARK TA12 powershift transaxle. The system monitors engine and transmission temperatures to prevent overheating.

Brake and Steering Systems:
The drum/shoe brake system ensures safety, with power-assisted service brakes for stress-free operation. Hydrostatic power steering eliminates kick-back and allows easy steering, featuring pivotal bearings and a double-acting steer cylinder for precise control.

Hydraulic System:
Features a full-flow reverse filter and a high-capacity pump. A priority distributor ensures steering priority, and a safety valve prevents uncontrolled load lowering.

Upright and Load Handling:
Available in Standard, Hilo, and Triplex versions, the uprights are designed for strength and durability. Features include adjustable rollers, tilt-lock valve, and hydraulic dampening system.

Additional Equipment and Security:
Options include SE tires, non-marking tires, heated cabs, various attachments, and safety features like acoustic alarms. The C15-20s series is CE certified and meets European safety standards.

Performance and Capacity:
Performance may vary due to motor and system efficiency. Capacity values are based on a standard upright position with a maximum lifting height of 3285mm. Load center is determined from the top and front face of forks, with adjustments for attachments and load dimensions.