Catalogs >
CLARK Material Handling >
Compact forklift with LPG drive CGC40-70

Compact forklift with LPG drive CGC40-70
8Pages

Add to favorites

Catalog excerpts

Compact forklift with LPG drive CGC40-70 - 1

COMPACT LPG TRUCK WITH CUSHION TYRES

Open the catalog to page 1

Compact forklift with LPG drive CGC40-70 - 2

• Whether you are transporting paper rolls, steel tubes, large drums or heavy steel coils - with the CLARK CGCseries you can use attachments, such as roll clamps, safely and economically. • With its cushion tyres, the CGC-series is perfectly suited for use in confined spaces. The compact powerhouse from CLARK The cushion forklifts with capacities from 4 to 7 t are specially designed for space-critical applications with heavy loads, where they excel with their very small turning radius and high performance. These workhorses are powered by the proven PSI six-cylinder, 82 kW LPG engine (4.3...

Open the catalog to page 2

Compact forklift with LPG drive CGC40-70 - 3

With a capacity of up to 7,000 kg the CLARK models from the CGC-series 40/50/55/60/70 provide reliable power in any application. • The nested upright sections allow space for cylinders, hoses and chains and offer the driver unhindered visibility of the forks and the load through the upright. Unhindered visibility + Minimum fatigue = Ultimate safety & Maximum productivity

Open the catalog to page 3

Compact forklift with LPG drive CGC40-70 - 4

PARKING BRAKE Easy and reliable • Foot-activated parking brake • When the parking brake is applied, the transmission is switched off to prevent driving against the brakes HYDRAULIC SYSTEM Optimum power distribution • Load-dependent distribution of the oil flow on the steering and lift hydraulics Hydraulics on attachments adjustable (volume flow and overpressure) • The main hydraulic valve has relief valves that can be adjusted to attachments Additional functions • Additional functions are easy to retrofit Full-flow return filtration • A full flow return filtration filters the oil every time...

Open the catalog to page 4

Compact forklift with LPG drive CGC40-70 - 5

STEERING AXLE • The spherically mounted tie rods withstand shocks from uneven ground without breaking or coming loose • The tapered roller bearings of the stub axle bearings can be lubricated and ensure a long service life • The tapered roller bearings used can be replaced quickly during service and reduce downtimes. TRANSMISSION • 1 gear transmission as standard for CGC40 • 2 gear transmission as standard for CGC50-70 Electronically controlled automatic switching • Comfortable and precise travel • No further adjustment is necessary even in the most difficult operations; sensitive working...

Open the catalog to page 5

Compact forklift with LPG drive CGC40-70 - 6

Generous interior with plenty of legroom The interior of the generously designed operator’s workplace offers the driver sufficient headroom and legroom. The driver can enter and exit comfortably via a large step. Handles on both sides of the truck increase safety. The steering column is tiltable and can be adjusted individually. A true space wonder CGC40/50/55 Working aisle widths from 3933 mm For comparison: the CLARK C40 LPG forklift truck with a 4 t capacity and superelastic or pneumatic tyres has a turning radius of 2,843 mm, while the CGC70 with a capacity of 7 t has a turning radius...

Open the catalog to page 6

Compact forklift with LPG drive CGC40-70 - 7

Overhead tilt cylinders Thanks to the overhead tilt cylinders, the forces acting on the upright during operation are diverted to the rear via the frame of the overhead guard. As a result, the vibrations acting on the driver during operation are reduced and the load is spared. • Long maintenance intervals • High-performance coolers as standard • Floor board can be removed without service tools • Reduced fuel consumption through optimum engine efficiency / performance • Quick and easy access to maintenance-relevant components • Long service life due to stable CLARK uprights Due to the cushion...

Open the catalog to page 7

Compact forklift with LPG drive CGC40-70 - 8

100 YEARS INNOVATION IN INDUSTRIAL TRUCK TECHNOLOGY A centenary is an important milestone that not only stands for consistency, but also testifies to the strength of the CLARK brand over generations. This strength is also reflected in the production figures of the CLARK Material Handling Company: more than one million forklifts in the past 100 years. Even more impressive than the number of forklifts produced is the company’s innovative heritage. The success story began in 1917, when employees of the CLARK Equipment Company in Buchanan, USA, built a threewheel platform truck with a loading...

Open the catalog to page 8