5E Series Mechanical Sampler Reduction and division of the material by online sample preparation system is available. ProCGSS: (take GB as an example) Sample Mixing - Material Mixing and Rectifying Device The sample stream will be mixed uniformly after reduction to make sure the sample is more representative in the following dividing process. Receiving Sample Bucket Mechanical Sampler Iron Removing Belt Conveyor Back to the Belt or Truck Reject sample Apart Collector Coal Stockpile Sample Division - Chain Scraper Dividing Device Equipped on belt conveyor, which is well matched with the belt surface. Capable to extract a sample on full cross section completely. Sample Reduction - Hammer Crusher Driving chain During the crushing, the sample with high moisture easily adheres to the crushing plate. CKIC provides two kinds of cleaning devices to improve the moisture adaptability considerably. Cleaning Device for PC0303 Hammer Crusher • oie Scraping plate Transmitting belt Equipped with cleaning device of crushing chamber, which consists of driving motor and scraper components, etc. During the crushing, the scraper will wipe the adhesive material on the crushing plate continuously. Cleaning Device of Crushing Chamber Eccentric gear assembly Movable Swing stem Drive motor Connecting swing stem Crushing Chamber Crushing plate Scraping plate