Fluorine / Chlorine Analyzer Models Available ◎ 5E-FT2301 to test Fluorine content ◎ 5E-CLT2311 to test Chlorine content Application 5E Series Fluorine / Chlorine Analyzer is used to determine the fluorine and chlorine in coal or other combustibles by combustion hydrolysis method (Ion selective electrode method for F and potentiometric titration method for Cl), which is widely applied in coal-fired plants, coal mines, steel plants, petrochemical industry, etc. Specification Model Fluorine: GB/T 4633, ASTM D5987, ISO11724, AS 1038.10.4 Chlorine: GB/T 3558, ASTM D6721, ISO587, SN/T 3596 Measuring Range Sample Mass High Temp. Furnace Precision Features High Automation Automatic analysis process available after sample loading. Analysis Time High Efficiency available to calibrate when decomposing the first batch of samples and not calculated to total analysis time Fluorine: 3. Titration Chlorine: 20mins 20mins For dual sample analysis: 75mins For continuous analysis : 20min/ sample (average) 2. Calibration of electrode parameters Two sample analysis for each batch and continuous analysis available. Sensitivity of Electrode Potential High Safety Assurance Minimum Filling of Injection Pump Within uncertainty range of standard sample Power Supply Dimension (L×W×H) Analysis Unit: 1400mm×600mm×610mm Reservoir: 900mm×500mm×510mm Unattended operation with the protection of lack or overflow of water level. Flexible Layout No water tap is required around the instrument as it is equipped