Medium bore size cylinder with valve CKV2
25Pages

{{requestButtons}}

Catalog excerpts

Medium bore size cylinder with valve CKV2 - 1

Series variation Medium bore size cylinder with valve CKV2 Series CKV2 Series Series variation Double acting single rod type Clevis bracket clevis type. Copper and PTFE free With indicator light With surge suppressor With silencer Piston rod material (stainless steel) Standard stroke length (mm) Bore size Head end trunnion type Axial foot type Mounting style :Custom order, Basic type Custom stroke length (per mm) Mounting style Double acting non-rotating type Product introduction Caulking Anxiety of loose is eliminated by dual caulking structure. Bush Dry bearing ( 20) MRL2 Oilless metal ( 25, 32, 40) MRG2 used. SM-25 Stable operation can be secured. Cylinder and solenoid valve can be disassembled by just loosing one set screw. Baffle type cylinder eliminating additional design of rod non-rotating guide. Flow control needle Manual override shaft In addition to grommet lead wire, DIN terminal type is available. Excellent rotation prevention accuracy. Extra small rotation clattering of GLC piston rod securely prevents Ending rod-rotation. (CKV2-M) Adaptor Extend while power is on by simply changing the adapter direction. Double ends covers Cylinder tube Cushion rubber Light weight aluminum material used. Stainless steel material used. Urethane rubber used. Excellent corrosion resistance. Excellent corrosion resistance. Impact noise is prevented at the stroke end. Piston packing seal Pre-lubricated sliding packing seal used. Improved durability. Rod packing seal Oil-free sliding packing seal used. Improved durability. Medium bore size cylinder with valve With valve

Open the catalog to page 1
Medium bore size cylinder with valve CKV2 - 2

Selection table of variation and options : Standard : Option : Available (custom order) : Available depending on conditions (consult with CKD.) : Not available Variation Port thread Wiring With surge suppressor With neon light Symbol No M Wiring Port thread Variation Double acting basic type Non-rotating Double acting basic type DIN terminal box Polyolefin with bellows Silicone rubber with bellows Piston rod material stainless steel Customized piston rod end form Copper and PTFE free With silencer With surge suppressor With neon light Cylinder switch Note 1: If the size of the screw at the...

Open the catalog to page 2
Medium bore size cylinder with valve CKV2 - 3

CKV2 Series Variation and option selection table Port I Option E Wiring G Switch thread Method model no. type H Switch J Accessory F Voltage B Bore size D * Complete the table at quantity Stroke length Mounting style Variation * Complete the table at left from left to right. left from left to right. Model no.: Medium bore size cylinder with valve Variation: Double acting non-rotating type Mounting style : Axial foot type B Bore size : 20 mm C Port thread type : Rc thread Stroke length E How to wire F Voltage : Reed T0H switch, lead wire 1 m :2 : Bellows, max. ambient temperature 100 : Rod...

Open the catalog to page 3
Medium bore size cylinder with valve CKV2 - 4

Pneumatic components Safety precautions Always read this section before starting use. Refer to Intro 71 for general notes of cylinders and Intro 78 for cylinder switches. Medium bore size cylinder with valve CKV2 Series Design & Selection Check that the valve's exhaust port (including PE port) is not smaller than the connecting port size. A respiration effect could be generated by the operation of the valve at the valve's exhaust port, and cause foreign matter around the exhaust port to be sucked in, or could cause foreign matter to enter if the exhaust port is facing upward. The actuator...

Open the catalog to page 4
Medium bore size cylinder with valve CKV2 - 5

CKV2 Series During Use & Maintenance Terminal box wiring methods 1. Common WARNING The connected device functions when manual operations are carried out, so check that no hazards exist before starting. CAUTION Low frequency use Switch the valve once every 30 days to prevent operation faults. After disassembling and assembling the valve, conduct an operation test in order below and confirm that operation is correct. Refer to the following drawings, and wire the terminal box in steps (1) to (3). 1) Pass the cap (4), washer (5), and gasket (6) in this order through the cabtire cable (7), and...

Open the catalog to page 5
Medium bore size cylinder with valve CKV2 - 6

2. Common (with T type switch) CAUTION Moving the switch position in the stroke direction Switches T2, T3, T0, T5 can be finely adjusted at 3 mm from the default installation position. If the adjustment range exceeds 3 mm, or when other switches are adjusted, move the band position. Loosen the switch fixing screw, move the switch along the rail, and tighten at the required position. When using the T2, T3, T0 or T5 switch, use a flat-tip screwdriver with 5 to 6 mm grip, 2.4 mm or smaller tip width, and 0.3 mm or thinner (clock screwdriver, precision screwdriver, etc.), and tighten with a...

Open the catalog to page 6
Medium bore size cylinder with valve CKV2 - 7

Medium bore size cylinder with valve Double acting single rod type Bore size: Double acting cylinder with valve CKV2 (standard type/with switch) mm Bore size CAT Actuation MDC2 Working fluid MVC Max. working pressure MPa SMD2 Min. working pressure MPa MSD* Withstanding pressure MPa FC* Ambient temperature STK Port size Stroke tolerance mm Working piston speed mm/s Cushion Lubrication Allowable energy absorption J Rubber cushion Not required (when lubricating, use turbine oil Class 1 ISO VG32.) 0.166 0.308 0.424 0.639 Solenoid valve specifications Rated voltage (note) V A Starting current A...

Open the catalog to page 7
Medium bore size cylinder with valve CKV2 - 8

Switch specifications * The T0/T5 switch can be used with 220 VAC. Contact CKD for working conditions. 1 color/2 color indicator, strong magnetic field proof Proximity 2-wire Descriptions Applications Output method Power voltage Load voltage Load current Light Leakage current NPN output PNP output NPN output 10 to 28 VDC 12/24 VDC 110 VAC 5/12/24 VDC 110 VAC 12/24 VDC 110 VAC 220 VAC 30 VDC or less 85 to 265 VAC 10 to 30 VDC 5 to 100 mA 5 to 20 mA (Note 1) 100 mA or less 50 mA or less 5 to 50 mA 7 to 20 mA 50 mA or less 20 mA or less 5 to 50 mA 7 to 20 mA 7 to 10 mA LED Red/green LED Green...

Open the catalog to page 8
Medium bore size cylinder with valve CKV2 - 9

Mounting style Without switch With switch Basic type Axial foot type Rod end flange type Head end trunnion type Bore size Selection guide Mounting style Port thread type Port thread type Blank Rc thread NPT thread (custom order) NN G thread (custom order) Stroke length Bore size Stroke length Note 1 5 to 750 20 Custom stroke length Note on model no. selection Note 1: Refer to page 664 for min. stroke length with switch. Note 2: For bellows J, the min. stroke length is 25 mm. If less than 25 mm stroke, consult with CKD. Note 3: The type with a surge killer (G) is included when a grommet lead...

Open the catalog to page 9

All CKD catalogs and technical brochures

  1. MN4GA / 4GB

    140 Pages

  2. MV3QR

    16 Pages

  3. SCP*3 Series

    60 Pages

  4. SCS2 series

    56 Pages

  5. LMD series

    15 Pages

  6. KBZ series

    64 Pages

  7. WXU series

    32 Pages

  8. AX6000M

    24 Pages

  9. SCS-G Series

    2 Pages

  10. CMK2 SR

    7 Pages

  11. SCPD2 Serie

    3 Pages

  12. SCPD2 Series

    2 Pages

  13. SCPS Series

    1 Pages

  14. SCM Series

    2 Pages

  15. GHV series

    4 Pages

Archived catalogs