High accuracy, rigidity and easier use. Mounting holes on two faces Wide linear guide Slide table Left/right symmetrical stoppers Standard rear piping ports provided on all bore sizes Cylinder switch mounting groove Higher accuracy Higher rigidity The linear guide’s table face is used as the slide table, thus realizing a higher accuracy compared to The slide table material has been changed from the conventional aluminum material to stainless steel or steel. A higher rigidity is conventional products. Parallelism 0.03mm ( 12-30 mm stroke) achieved when used in combination with the wide guide. Easier use Hassles for designing the cylinder and linear slide separately have been eliminated, thus reducing the design Radial moment Displacement (mm) → Linear slide cylinder 1698 man-hours. The freedom of design and ease-of-use have been enhanced with left/right symmetrical mounting of stoppers and multi-face piping, etc. Small parts stored on the tray or Feed of small parts supplied from the tray

A wide guide, featuring high accuracy and high rigidity, has been mounted on the air cylinder. The linear guide table face is used as the slide table, thus realizing ease-of-use with an unprecedented accuracy and rigidity. Linear slide cylinder LCG Series. ( 6, 8, 12, 16, 20, 25) High freedom of design Wide option and variation This product’s freedom of design is particularly high with the left/right symmetrical stopper, multi-face piping, two-face mounting and positioning hole, etc. The standard type, position locking type and clean specification type models are available. Options include a...

Series variation Linear slide cylinder LCG Series LCG Series Series variation Stopper position Stopper position Stopper position Stopper position Stopper position Stopper position Stopper position Stopper position Stopper position Stopper position Bore size Stopper position Shock absorber type stopper Stopper position Stopper for adjustable stroke 6 8 Double acting single rod type Double acting position locking type Double acting single rod type clean room specifications Linear slide cylinder Combined functions

Pneumatic components Safety precautions Always read this section before starting use. Refer to Intro 67 for general precautions. Linear slide cylinder LCG Series Design & Selection 1. Common CAUTION Select the cylinder based on the “LCG selection guide “ on Side without locking mechanism W hen using the cylinder where it could be subject to water or I f lowering speed is to be increased with the quick exhaust oil exposure, where it could corrode, or where high levels of valve, the cylinder may move out faster than the lock pin and dust are present, the cylinder could be damaged or malfunc- prevent...

Installation & Adjustment Precautions for piping joint O bserve the following bolt insertion lengths and tightening Install a flow control valve when piping. The applicable joints torque when installing the jig on the slide table or end plate. Descriptions Port Joint outer Bore size Port size dimension Applicable joints diameter B A (mm) Table Applicable bolts Tightening torque (N m) Max. screw-in length L (mm) End plate Applicable bolts Tightening torque (N m) Screw-in length L (mm) Observe the following valves for bolts at the stopper and in Check that no dents or scratches occur on main tubing...

LCG Series The cylinder switch could malfunction if there is a magnetic body, such as a steel plate, near the cylinder switch. Separate the magnetic body by at least 10mm or more from the cylinder surface, or change the cylinder switch mounting surface for safe use. (All bore sizes common) 3. Position locking type LCG-Q CAUTION The locking mechanism functions at stroke end. If the stop 10mm and over Magnetized device such as steel plate, etc. per is applied with the external stopper in the middle of a stroke, the locking mechanism will not function and the load may drop. Before setting the load,...

Linear slide cylinder Double acting single rod type Note: Stroke length other than above is not available.

Switch specifications * he T0/T5 switch can be used with 220 VAC. T Consult with CKD for working conditions. Descriptions Applications Programmable controller, relay, IC controller, relay circuit (w/o light), serial connection Load voltage Load current Without indicator light Leakage current Descriptions Applications controller, relay controller, relay Output method Power voltage Load voltage Load current Leakage current Cylinder weight Basic type Basic type stroke length (mm) 40 50 75 Additional variation/option (stopper) Option, stopper symbol S1 to S4 S5/S6 A1 to A4 Linear slide cylinder Combined...

Without switch With switch Bore size ( ) Model no. Switch quantity Axial lead Radial lead wire Contact Indicator Note on model no. selection Note 1: hen changing adjustable stroke range, use a W discrete stopper for adjustable stroke listed on page 1711. W Note 2: hen using shock absorber type, refer to K in the stopper dimensions table on page 1726. Note 3: efer to stopper dimensions on page 1726 for R port positions. Note 4: hen no stopper, port position of standard type W are as following Fig. and . Note 5: he stopper for adjustable stroke and shock T absorber stopper combination is available...

LCG double acting single rod type selection table (Combinations of stopper for adjustable stroke and shock absorber type stopper) Option symbol Stopper for adjustable stroke Model no. symbol Bore size Stroke length S1 S2 S3 S4 S5 S6 6, : Combination possible -: Combination not available Linear slide cylinder Combined functions The option symbol D: with stopper section port and T stopper block alloy steel (nitriding) combination follows the combination table above.

» Stopper section and stopper for adjustable stroke or shock absorber stopper set i Use when changing from standard to stopper for adjustable stroke or with shock absorber stopper Bore size

How to order the discrete stopper for adjustable stroke Hexagon socket head set screw with urethane Used when changing the adjustable stroke range or setting custom stroke length Bore size (Page 1708 section Adjustable stroke range S01 Indicate S01, S02, S03 for A . Note: S03 is not available for 6, 8. Depending on the type, the incompatible models or adjustable stroke ranges may differ from the above values. Cautions when purchasing discrete stopper Only when installing a stopper for adjustable stroke or a shock absorber type stopper on installation position (1) or (2) (refer to page 1708),...