Technical documentation - Effluents
10Pages

Designer and manufacturer of flexible tanks Citerneo specialise in the design and manufacture of high quality flexible tanks for the storage of liquids. The CITERNEO group offer a 100 % recyclable range that meets the technical needs of the global market. PRODUCT PRESENTATION TECHNICAL FEATURES FLEXIBLE TANK ADVANTAGES EQUIPMENT INSTALLATION GUIDE ISO 9001 CERTIFICATE GUARANTEE GENERAL TERMS AND CONDITIONS exam+ UKAS

PRODUCT PRESENTATION CITERNEO’s exclusive development of flexible tanks forms part of their global eco-responsible process. Made from 100 % recyclable technical fabric, these tanks are an effective and reliable solution for the storage of liquids. Whatever their use: industrial (effluents, leachates, digestate...), agricultural (slurry, effluents from farm-produce, digestate...), domestic (used water...), CITERNEO flexible tanks do not require any specific maintenance. Manufactured in a composite fabric 100 % polyester with a PVC coating, they are designed to resist a high range of...

EQUIPMENT SOILLESS VERSION: DN 100 Knife gate valve with ymmetric s connection and Securtex 3 antivortex DN 140 visiting hatch with integrated degassing DN 100 Knife gate valve with slurry spreader connection and Securtex 3 antivortex FULL VERSION • DRY HYDRANT: 1 Block valve with handweel Dry hydrant set with x2 pipe and 2 S ecurtex 3 anti-vortex DN 150 slurry spreader connection (Optional: DN 200) Intake cone Optional: 90 m³ / h brewing pump with two symmetric connections THE TANK IS ADJUSTABLE: It is possible to use specific equipment in order to improve the functioning or using of the...

INSTALLATION GUIDE SURFACE PREPARATION: A 15 to 20 cm bedding of compacted gravel is r ecommended to ensure the stability of the platform. A 10 cm (+/- 2 cm) layer of sand (0/2 cm) is necessary to avoid puncturing. Crushed material must not be used on s urface area. The dimensions of the platform area must match those of the empty tank plus an area of 0,50 meter minimum on each side of the tank. The platform must support the weight of the full tank w ithout sagging or eroding. The earthwork shall be carried out in accordance with the opposite diagram. Slope to the center of the platform (1...

INSTALLATION GUIDE Follow filling instructions CONNECTION AND FILLING: The filling can be carried out by gravity or by pumping with the suction and / or filling devices. Any soilless connection to the tank must be flexible to absorb level variations. Do not obstruct in any case the overflow and the degassings and n ever put a flexible tank under pressure. The selection and positionning of the equipment depend on the use. If the filling is not done immediately, it is recommended to ballast the tank with a minimum of 5 cm of liquid. Please observe and follow the instructions on the tank...

Certificate of Approval This is to certify that the Management System of: CITERNEO ZI La Boitardiere, 124 rue de la Girardière, 37402 AMBOISE, France has been approved by LRQA to the following standards: ISO 9001:2015 Gilles Bessiere - Area Technical Manager Issued by: LRQA France SAS for and on behalf of: Lloyd's Register Quality Assurance Limited Current issue date: 8 January 2019 Expiry date: 5 January 2022 Certificate identity number: 10163742 Original approval(s): ISO 9001 – 6 January 2013 Approval number(s): ISO 9001 – 0032752 The scope of this approval is applicable to: Design and...

GUARANTEE* GENERAL INFORMATION TO THE ATTENTION OF THE BUYER-USER OF FREESTANDING FLEXIBLE TANK FOR THE STORAGE OF FILTERED EFFLUENTS The guarantee period is indicated in the contractual documentation. The guarantee period is one year for the equipment of the tank and electromechanical equipment provided that the installation and the utilisation of the tank comply with the recommended procedures. No depreciation coefficient is applied to this warranty. CITERNEO flexible tanks for the storage of effluents are designed to resist a storage temperature from -30 °C to +70 °C. Any storage of...

GENERAL TERMS AND CONDITIONS 1- OBJECT The purpose of the present General Terms and Conditions is to define the conditions under which the C ITERNEO Company is committed to its Customer to selling the products concerned by the Quotation-order form.All correspondence must be written in French. 2- SCOPE 2.1 The present General Terms and Conditions, the Quotation-order form as well as any related documents (such as those relating to warnings and recommendations) constitute the entire Contract between the arties. p They shall supersede any principle agreement or exchange of correspondence...

ZI de la Boitardière 124 rue de la Girardière BP226 37402 AMBOISE Cedex FRANCE