Designer and manufacturer of flexible tanks ® FLEXIBLE TANK • FIRE-FIGHTING Citerneo specialise in the design and manufacture of high quality flexible tanks for the storage of liquids. The CITERNEO group offer a 100 % recyclable range that meets the technical needs of the global market. PRODUCT PRESENTATION FIRE FIGHTING TECHNICAL FEATURES FLEXIBLE TANK ADVANTAGES EQUIPMENT INSTALLATION GUIDE GUARANTEE www.citerneo.eu Date de création : 15/03/2017

This equipment is a watertight enclosed flexible and foldable tank, which structure is formed by an exclusive technical fabric coated with PVC. The tanks offer total protection of their contents. Thanks to the design, the stored products are in permanent contact with the internal walls of the tank, which means they are not in contact with any exterior elements. This aspect prevents any evaporation, colouring or alteration of the water. Storage of water for fire-fighting is frequently used for the protection of buildings that are not covered by the classic fire-fighting network (industrial sector,...

Coating type Two-sided varnish Finish Frame breaking strength (warp/weft) Resistance to tears (warp/weft) Resistance to puncturing Temperature resistance range These technical information are minimum medium values with a tolerance of +/- 10%. ADVANTAGES Economical solution No evaporation Simple and fast to install Compact and foldable Total protection Net volume storage High capacity up to 2 500 m3 Minimal earthwork No needs of building permit A transportable solution Easily integrable in the environment www.citerneo.eu

DN 100 Knife gate valve with Securtex 3 antivortex FREEZE-FREE VERSION: BLUE DRY HYDRANT VERSION 1 DN 100 bridle, Securtex 3 antivortex, Sleeve to glue, DN110 elbow and 2x2 pipe to glue DN 100 reversible suction outlet in S Automatic purge system Block valve, operating stem with 30x30 manipulation square FREEZE-FREE VERSION: CONNECTION TO BURIED PIPE 1 Connection to buried pipe DN 100 bridle, Securtex 3 THE TANK IS ADJUSTABLE: It is possible to use specific equipment in order to improve the functioning or using of the tank according to each project. www.citerneo.eu Date de création : 15/03/2017...

SURFACE PREPARATION: Slope to the center of the platform (1 %) A 15 to 20 cm bedding of compacted gravel is recommended to ensure the stability of the platform. A 10 cm (+/- 2 cm) layer of sand (0/2) is then necessary to avoid puncturing. The dimensions of the platform area must match those of the empty tank plus an area of 0,50 meter minimum on each side of the tank. The platform must support the weight of the full tank without sagging or eroding. The earthwork shall be carried out in accordance with the opposite diagram. Clean and leveled ground + layer of sand (0/2) 10 cm (+/- 2 cm) TANK INSTALLATION:...

Follow the user instructions The filling can be carried out by gravity or by pumping through the inspection hatch or by the suction and / or filling devices. Any soilless connection to the tank must be flexible to absorb level variations. Do not obstruct in any case the overflow and never put a flexible tank under pressure. The selection and positionning of the equipment depend on the use. If the filling is not done immediately, it is recommended to ballast the tank with a minimum of 5 cm of liquid. Please observe and follow the instructions on the tank label. TECHNICAL OBLIGATION: The maximum...

GUARANTEE* -69-01-322 GENERAL INFORMATION TO THE ATTENTION OF THE BUYER-USER OF FREESTANDING FLEXIBLE TANK The guarantee period is indicated in the contractual documentation. The guarantee period is one year (unless otherwise stated in the Contract - invoice/quotation) for the accessories, the production and electromechanical equipment provided that the installation and the utilisation of the tank comply with the recommendations. No depreciation coefficient is applied to this warranty. CITERNEO flexible tanks for water storage are designed to resist a storage temperature from -30 °C to +70 °C....

ZI de la Boitardière 1030 chemin du Roi BP 226 - 37402 AMBOISE CEDEX FRANCE