*mydirectindustry

HTD series

Product catalog summary

Overview: The document provides a detailed analysis of the HTD1500 and HTD4000 hardness testers, focusing on their non-destructive case depth analysis capabilities. It highlights the patented Ernst principle for measuring case depth from 0.05 mm to 2.7 mm, emphasizing efficiency and cost savings.

Specifications: The HTD1500 operates with test loads ranging from 100 kgf to 1500 kgf, while the HTD4000 ranges from 200 kgf to 4000 kgf. Both models feature automatic load application based on case depth, with a minimum measurable diameter of 10 mm and a working area dimension of 335 mm x H 315 mm.

Procedures: The testing process is non-destructive, allowing for the examination of entire production batches without the need for cross-sectioning or polishing. Each test takes approximately one minute, significantly reducing testing time and increasing productivity.

Norms and Certifications: The devices comply with ASTM E-18 and ISO 6508 standards, using indirect methods on certified test blocks.

Features: The testers offer direct reading of case depth on an 8.4” touch-screen display, with schematic curves and statistical overlays. Selectable functions include load selection, language options, calibration, and data output via USB and Ethernet interfaces.

Additional Information: The devices support multiple languages, including English, German, Italian, Spanish, and French, with other languages available upon request. The dimensions are approximately 370 mm x 1200 mm x H 850 mm, with a weight of around 440 kg. Power supply requirements are 110-240 Vac 50/60 Hz.

Catalog excerpts

NON-DESTRUCTIVE CASE DEPTH ANALYSIS case depth analysis | Prüfung der Oberflächenbehandlung controllo dello spessore del trattamento termico Ernst patented principle Case depth determination from 0.05 mm to 2.7 mm Patentiertes Ernst-Prüfverfahren Non-destructive testing Zerstörungsfreie Werkstoffprüfung Testing of the whole production batch is possible eliminating disposal costs and allowing savings on consumables ZERSTÖRUNGSFREIE PRÜFUNG DER OBERFLÄCHENBEHANDLUNG 1 test: 1 minute Drastic reduction of the test times, increased productivity CONTROLLO NON-DISTRUTTIVO DELLO SPESSORE DEL TRATTAMENTO TERMICO One measurement vs. a complex process No need for cross-sectioning, polishing and mounting of the test piece Hardness Testers | Härteprüfer | Durometri Prüfungsmöglichkeit für die gesamte Produktionscharge, Materialeinsparung und Beseitigung der Entsorgungskosten 1 Test: 1 Minute Drastische Reduzierung der Prüfdauer Erhöhung der Produktionsleistung Eine einzige Messung vs. einen komplexen Arbeitsprozess Keine Sägemaschine, Poliermaschine, Einbettpresse, kein Mikrohärteprüfgerät und keine entsprechenden Zubehörteile erforderlich Principio Brevettato Ernst Misurazione dello spessore del trattamento termico da 0.05 mm a 2.7 mm Controllo non distruttivo Possibilità di controllo dell’intero lotto di produzione Risparmio di materiale ed eliminazione dei costi di smaltimento 1 test: 1 minuto Drastica riduzione dei tempi di prova Aumento della produttività Una sola misurazione vs un processo complesso Non necessita di troncatrice, pulitrice, inglobatrice, microdurometro e relati

Open the catalog to page 1

Open the catalog to page 2

HTD series

HTD series

Catalog excerpts

All CISAM-ERNST catalogs and technical brochures