*mydirectindustry

AT130

Product catalog summary

Overview: The document provides technical specifications and features of the Rockwell hardness tester, highlighting its efficiency, reliability, and compliance with international standards.

Specifications:

Working Principle: Utilizes the Rockwell and Super Rockwell methods.
Test Load: Rockwell MOD R: 60 kgf, 100 kgf, 150 kgf; MOD SR: 15 kgf, 30 kgf, 45 kgf.
Preload: MOD R: 10 kgf; MOD SR: 3 kgf.
Precision: HRC 0.3, HB < 1%.
Load Application Method: Manual.
Standard Scales: Rockwell C, A, B, D, F, G; Brinell HB/30.
Minimum Measurable Diameter: 10mm without surface preparation.

Features:

Efficiency: Drastic reduction of test time to 2 seconds.
Reliability: Insensitivity to deflection or bending during tests.
Productivity: One lever pull-down equals one test.
Robustness: Suitable for harsh environments.

Compliance: Meets ASTM E-18, ISO 6508, ISO 6506, and ISO 6507 standards using indirect methods on certified test blocks.

Stands and Measurements:

TX Versatile: Max height 400 mm, depth 225 mm.
NX Conventional: Max height 210 mm, depth 240 mm.
CAR Mobile: Max height 990 mm, depth 300 mm.
MUR Wall Mounting: Height dependent on installation, depth 300 mm.

Additional Information:

Outputs: RS232.
Power Supply: 100-240 volts.

Contact Information: Via Monte Tagliaferro 6, 21056 Induno Olona (Varese), Italy. Tel: +39 0332 200 216, Fax: +39 0332 202 623, Email: [email protected], Website: www.cisam-ernst.com

Catalog excerpts

Rockwell hardness tester | Rockwell Härteprüfer durometro Rockwell NOT AFFECTED BY BENDING NOR DEFLECTION OF THE MATERIAL Rockwell principle Principio Rockwell Drastic reduction of test time: 2” Drastische Reduzierung der Testzeit: 2” Drastica riduzione del tempo di prova: 2” Spring loading system Sistema di carico a molla Reliability -> insenstivity to deflection or bending of the piece during the test Test time drastically reduced compared to load cell systems Compliance with international standards Zuverlässigkeit -> Unempfindlichkeit gegen Durchbiegung oder Federung des Stücks während der Prüfung Prüfzeit im Vergleich zu Wägezellensystemen drastisch reduziert Einhaltung internationaler Normen Affidabilità -> insensibilità a cedimenti o flessioni del materiale durante la prova Velocità significativamente superiore ai sistemi con cella di carico Conformità agli standard internazionali 1 lever pull-down = 1 test Increased productivity VON FEDERN UND DURCHBIEGEN DES MATERIALS NICHT BEEINFLUSST Erhöhte Produktivität 1 movimento di leva = 1 prova Aumento della produttività NON RISENTE DI FLESSIONI O CEDIMENTI DEL MATERIALE Robustness Most suitable for harsh environments Hardness Testers | Härteprüfer | Durometri Robustheit Bestens geeignet für schwierige Umgebungsbedingungen Robustezza Ideale

Open the catalog to page 1

ENG Working principle | Prüfverfahren | Principio di funzionamento MOD R: Rockwell - MOD SR: Super Rockwell Test load | Prüflast | Carichi MOD R: Rockwell 60 kgf (N 588.40) - 100 kgf (N 980.70) - 150 kgf (N 1471) | Brinell 62.5 kgf (N 612.90) - 125 kgf (N 1226) - 187.5 kgf (N 1839) MOD SR: Rockwell 15 kgf (N 147) - 30 kgf (N 294) - 45 kgf (N 441) | Brinell 62.5 kgf (N 612.90) - 125 kgf (N 1226) - 187.5 kgf (N 1839) Preload | Vorlast | Precarico Norms and certifications | Normen und Zertifizierungen Certificazioni e norme ASTM E-18 ISO 6508 ISO 6506 indirect method on certified test block | indirektes...

Open the catalog to page 2

AT130

AT130

Catalog excerpts

All CISAM-ERNST catalogs and technical brochures